Jump to content

Recommended Posts

Posted (edited)

Sort of ....

 

In case anyone was wondering, as I was, the following 5 vehicles support Vehicle to Home (V2H):-

 

Hyundai Ioniq 5

Hyundai Ioniq 6

Kia EV9

Nissan Leaf

Cupra Born

 

You do need a bi-directional charger as well.

 

With most car batteries seeming to have more capacity than your standard home solar batteries, and if you are considering one of the above cars anyway, then a bi-directional should be a no brainer decision IMHO. Except, they do not yet appear to be available in the UK 😞 - see later post.

 

Further investigation required to see if there is an auto cut off feature for when the battery gets down to a preset level, say 20%.

Edited by BotusBuild
  • Like 2
  • Thanks 1
Posted

That didn't take long

 

Explore More

What are the minimum battery levels required for V2H operation?

The minimum battery levels required for V2H operation vary by vehicle and charger, but most systems allow you to set a minimum state of charge to prevent draining the battery too low. Typically, you can set this between 20% and 30% to ensure you have enough power for driving. Check your specific EV and charger's manual for exact settings.

Posted

Bidirectional Charger Availability in the UK

Bidirectional chargers are expected to become available in the UK during 2026, with the first commercial launches expected in the second half of the year. However, availability will be gradual and limited initially.

 

Nissan's 2026 Launch

Nissan has announced it will launch affordable bidirectional charging on selected electric vehicles starting in 2026, with the UK as the first market. This is significant because Nissan has already achieved G99 Grid code certification with an AC-based solution, which is required to supply electricity to the UK national energy grid. The company aims to price its AC bidirectional charger comparably to a standard mono-directional charger available today, making it more accessible than previous estimates.

 

Other Manufacturers

Enphase Energy has announced its IQ Bidirectional EV Charger will be available globally in the second half of 2026. This DC-based charger delivers up to 11.5 kilowatts of bidirectional power and includes features like "black start" backup capability for powering homes during outages.

 

Current Barriers in the UK

Despite the promising timeline, the UK still faces regulatory and technical challenges. Current smart charging legislation doesn't fully accommodate bidirectional charging yet, and there are complications around:

 

Standardisation of communication

  • protocols between chargers and vehicles
  • Tax and regulatory implications for selling electricity back to the grid
  • Integration with existing electricity grid infrastructure

The bottom line: While chargers are coming to market in 2026, widespread availability will likely take time. Early adopters may see options from Nissan and other manufacturers, but it will be a gradual rollout rather than an immediate, universal availability.

Posted

I presume you ideally have to change all your RCBOs to bidirectional? 

 

My new garage board is all RCBO, bidirectional, double pole, SPD bells and whistles. PV will go on the garage. 

 

I'll have to check what I fitted to the slightly older board in the house though I don't think that'll matter as the PV with be the Henley side of the house cu. 

 

 

Posted (edited)

One of the AI responses stated that an RCD was required. More research required on  that point, and its something that I would require the charger installer to specify.

Edited by BotusBuild
Posted

Hi Mark,

That was me, which i corrected with the reference to the Carwow article.

 

But that charger you mention sounds interesting. If it does turn out to work with non-V2H cars that could be a boost to this option.

Posted
3 hours ago, BotusBuild said:

One of the AI responses stated that an RCD was required. More research required on  that point, and its something that I would require the charger installer to specify.

 

It'll be in the charger installation manual.

 

Dedicated to my EV charger I have a 40A, bidirectional, double pole, Type C, 30mA RCBO. 

Posted (edited)

This is part of my plan to be off-grid for electricity.

Instead of a genny in the winter I plan to use my EV to top up the house batteries if/when needed.  Doing it with V2L is the ideal, but is still very tricky at the moment as the above posters have said, but if nothing else I can run a 2000W inverter to the vehicle and power/charge the house battery off that.  It's pretty much how many electric campers work atm.  Youtuber Glyn Hudson for example powers his ENV200 campervan that way - a 1500W inverter off the starter battery, which is kept topped up by the traction battery as long as the ignition is in the partially on position. So it would need to be in a garage or some other secure location obviously.  The other way to do it is just via a DC/DC charger off the starter battery, which is a lot easier to work with (being 12V) than the 400V traction battery.  If needed I can just go to the rapid EV charger down the road to recharge my car and bring back power to add into the house system, which would be no different to going to the petrol station to buy fuel for a genny, just a lot greener.

Edited by Square Feet
Posted (edited)

If you look on the ENA Connect Direct type test register there's a few grid compliant V2x chargers listed. Octopus and Indra have a few and one or 2 others but not many.....nothing from Sigenergy.

 

If your car has V2L with 240vac outlets for camping/power tools, I beleive you can wire these to the generator inputs of Victron inverters fitted with genny inputs. Could get you up to 3kw out of the car??

 

Edited by Dillsue
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...