ToughButterCup Posted June 18, 2016 Share Posted June 18, 2016 Has anyone needed to re-seal their shipping container door with new rubber seals? If so, which adhesive did you use, please? Link to comment Share on other sites More sharing options...
PeterW Posted June 18, 2016 Share Posted June 18, 2016 If it's rubber to metal then a Stixall or even CT1 would be preferable. Link to comment Share on other sites More sharing options...
ToughButterCup Posted June 18, 2016 Author Share Posted June 18, 2016 Ta! Link to comment Share on other sites More sharing options...
JanetE Posted June 18, 2016 Share Posted June 18, 2016 Just been watching the CT1 video! What an amazing product! We've just got to get some http://www.sealantsonline.co.uk/Products/CTec_CT1_Sealants_Adhesives Link to comment Share on other sites More sharing options...
Triassic Posted June 19, 2016 Share Posted June 19, 2016 I've looked at the door seals on our containers and they are held in place with a metal strip and rivets. Link to comment Share on other sites More sharing options...
Barney12 Posted June 20, 2016 Share Posted June 20, 2016 On 18 June 2016 at 11:22, JanetE said: Just been watching the CT1 video! What an amazing product! We've just got to get some http://www.sealantsonline.co.uk/Products/CTec_CT1_Sealants_Adhesives Me too. Is that multi solve really needed? Or do I remember that baby wipes do the same job? Link to comment Share on other sites More sharing options...
Nickfromwales Posted June 20, 2016 Share Posted June 20, 2016 The spray is a cleaner and a finisher. You can't lick your finger and wipe CT1 like you can with silicone, as this stuff works underwater too the multisolve is used AFTER preparatory cleaning of the surfaces has been done, and is basically there to remove contaminants that could stop the CT1 adhering properly ( and thus making the process a waste of time and money ). You'll also need the MS to clean up afterwards. It's a bloody handy spray which also removes cured silicone from tiles etc, and general cleaning where conventional cleaners won't shift it. DONT leave it on any surfaces as it soaks into silicone, for one, and dissolves it nicely. NOTE : The white CT1 goes custard yellow and looks terrible. Don't use it as a finish anywhere where it will be seen ! Use clear, wipe it all but completely off, as a sealant, and then go over the top with white silicone as a finisher The other colours are fine, grey, beige, black silver etc, as is the clear. The white sucks, but is still good for purpose. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now