Jump to content

Bringing out window reveals


SanMan

Recommended Posts

A few years ago, we had new windows fitted and in places were left with slightly large gaps between the frames and reveals. We don’t want to use plastic trims or sealant.We also don’t want to simply plaster over the gaps because then it looks like there is a small section of wall next to the window before it does a right turn into the reveal. 

What is the best way to fix this without replastering the entire wall? Is there any way of attaching a new corner bead at the front of the reveal (by recessing it into the existing plaster or overlaying/feathering it in), fitting a piece of plasterboard into the reveal and then finishing it with plaster? Or are there other options? 

Thank you.

 

IMG_9782.jpeg

IMG_9783.jpeg

Link to comment
Share on other sites

Cloaking Fillet Finishing Trim | Eurocell

 

thats the stuff you want.

superglue it to the window frame then a bit of silicone and caulk of you have some gaps. 

or if you dont like trim then a massive thick bead of caulk.

intrigued to know what the outside looks like if the frames are narrower than the plasterboard reveals.

 

Bead Finishing Trim | Eurocell

may aswel get some trim for along the wondow board to hide where the frame meets the sill. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...