CalvinHobbes Posted March 29, 2023 Share Posted March 29, 2023 The house will be block built have 150mm floor insulation and 200mm eps fill in walls, block build with triple glazing, air tight, wet plaster. The architect has planned underfloor heating, MVHR and ASHP but I was reading about the Daikin Multi + possibly with a battery to store off peak. Is that bonkers? Tbh trying to cut costs, got a plumbing quote for 22k. Link to comment Share on other sites More sharing options...
nod Posted March 29, 2023 Share Posted March 29, 2023 Get another plumbing quote 1 Link to comment Share on other sites More sharing options...
JohnMo Posted March 29, 2023 Share Posted March 29, 2023 Will it comply with building regs? Would you not need balanced ventilation system? As mentioned get other quotes 1 Link to comment Share on other sites More sharing options...
pudding Posted March 30, 2023 Share Posted March 30, 2023 No reason for it not to work if it's designed and sized properly. Stick with the MVHR though, still want controlled ventilation. 1 Link to comment Share on other sites More sharing options...
severnside Posted March 30, 2023 Share Posted March 30, 2023 We are using MVHR, A2A (Part Warm heating, Part Split ACs) and Direct electric Hot water. We still haven't finished renovation but It should work. If you have loft then a ducted unit is also possible instead of lots of wall units. Link to comment Share on other sites More sharing options...
Iceverge Posted March 30, 2023 Share Posted March 30, 2023 Get a price for 300mm EPS for the floor. Shouldn't be much in it cost wise. It's a cheap place to add insulation and the UFH pipes will be the hottest thing in the building, hence loosing the most heat, important to have them well insulated. That plumbing quote sounds bananas. How large is the house? Lots of us have done our own, I did after the plumber made a mess of it. The Hep2O parts and a 300l direct UVC were about €2000. Add UFH for the ground floor and provision for a future ASHP and the total for parts would be still less than 4k. Then source an ASHP yourself. Reasonable monoblocks come up on eBay for about £2k regularly enough. 1 Link to comment Share on other sites More sharing options...
mattman Posted April 12, 2023 Share Posted April 12, 2023 (edited) I too would stick with the MVHR and ASHP (air to water) which your architect specified. That way with the MVHR you get your controlled ventilation, required for when you're airtight, and with the air to water ASHP you get to heat all your hot water as well as space heating. We are a block build and have an MVHR and ASHP and it all works really well and is quite cheap to run. Edited April 12, 2023 by mattman 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now