Digital Bath Filler? - Press & forget?

[Andehh]

We are looking at options for the family bathroom (only bath). With young children, I quite like the idea of being able to walk in (Wi-fi?) press a single button and walk out gain, whilst the bath fills itself up to the right temperature & then turns itself off when it reaches the right depth.

 

Is this what Digital bath filler do? Or do you still need to turn them off when the bath is full?

 

Any recommendations for a device that does this? (controls the plug as well?)

[PeterW]

Mira mode does it - you can programme the fill and temperature level in the app from memory. 

[TonyT]

And who puts the plug in the bath?

[JohnMo]

Any worries the kids jump in and it's too hot?

[PeterW]

You put the plug in, press the preset button and walk away. It sets the flow temperature and the time. 

[Temp]

Does it detect that the bath has been emptied before someone presses it again ? I guess that's OK if its got an overflow that can cope with the flow rate.

Edited November 21, 2021 by Temp

[SteamyTea]

FFS. An app for a bath.

 

An app to lock kids in their rooms sounds better.

 

https://inews.co.uk/news/tesla-app-outage-leaves-drivers-locked-out-cars-1311237

[ToughButterCup]

Our baths are digital too. 

Put the plug in with fingers and switch taps on and off with the same digital expertese.

[SteamyTea]

Just now, ToughButterCup said:

Our baths are digital too. 

Put the plug in with fingers and switch taps on and off with the same digital expertese.

6bit resolution in your case. 10 for the rest of us.

 

[PeterW]

3 hours ago, JohnMo said:

Any worries the kids jump in and it's too hot?

You can set a max temperature on the Mira units for bath and shower to stop any potential scalding 

[Andehh]

Thanks very much all, just what I was after!