Jump to content

Gas oven


Recommended Posts

36 minutes ago, ProDave said:

Ovens don't actually use much, typically they are 2.3Kw and often do come with just a 13A plug.  But the thorn in the side is fixed heating appliances over 2KW are supposed to be on a dedicated circuit.

I guess an induction hob equally draws little current. Are most electricians qualified to cap the gas so a swap to electric can be made ?

Link to comment
Share on other sites

43 minutes ago, pocster said:

I guess an induction hob equally draws little current. Are most electricians qualified to cap the gas so a swap to electric can be made ?

Induction hobs usually draw a LOT more than an oven.

 

An electrician is not qualified to cap off a gas supply unless he is also gas safe registered.

  • Thanks 1
Link to comment
Share on other sites

7 minutes ago, ProDave said:

Induction hobs usually draw a LOT more than an oven.

 

An electrician is not qualified to cap off a gas supply unless he is also gas safe registered.

This pack suggests it’s ok ????

 

https://www.myappliances.co.uk/prod/Oven-Hob-Packs/art50606-oven-and-hob-pack.htm?gclid=EAIaIQobChMI6YWNuJup5gIVybHtCh0cuwG7EAQYAiABEgJsXPD_BwE

Link to comment
Share on other sites

8 hours ago, ProDave said:

13A is 3KW.  Put all 4 rings on and that's 750W per ring available.  I hope you are not in a hurry.

Don't they swap the power between 'rings' when more than two are on.

And isn't it 10A for a continuous load on a socket?

Link to comment
Share on other sites

15 hours ago, Temp said:

Nah - don’t like tenants having gas . Gone for electric oven and induction hob - electrician will run a new feed for hob .

Link to comment
Share on other sites

  • 1 month later...

To do this properly, contact the gas company and specify who you need to call for your work. Let 3 qualified specialists do it better. I saw a gas explosion indoors, believe me, you don't want it.

Switching to electricity is a good step! Electric stoves and sockets are standard, but check with a consultant or electrician to find out which sockets will work. Every rule has an exception, so it's better to ask specialists than to overpay later.

  • Thanks 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...