Jump to content

Pocster

Members
  • Posts

    14421
  • Joined

  • Last visited

  • Days Won

    29

Everything posted by Pocster

  1. Pocster

    Air brick

    In my world I would do exactly that . Alas purchases on a self build divide into these categories... 1) Things BCO wants 2) Things I want 3) Things SWMBO will HAVE The log burner is a category 3) issue ...
  2. Pocster

    Air brick

    Be my guest to tell SWMBO that .... ?
  3. Pocster

    Air brick

    So you don’t bring in ‘external’ air ??
  4. Pocster

    Air brick

    Actually thinking about it more . Where can ( must ? ) the air vent in the property be relative to the log burner ? Can I literally stick a ceiling vent in above the log burner ? ( next to the flu ) ?
  5. Pocster

    Air brick

    Thanks Floor makeup can’t be altered ( ufh etc . ) I could run a pipe from the wall/ceiling below ground to upstairs ( timber frame ) then go to the outside with a vent .
  6. Pocster

    Air brick

    So my flu installer is coming next week . He wants an air brick in the underground section where the log burner is to go . Going to be tricky to install underground !! - can I pipe to it ? I.e air brick above ground but pipe work to below ground ? Also isn’t this just a draft maker ? - I could block it up for the air test at the end . I guess I’m asking if you can get an air brick that’s one way ? ? ; draws air in but doesn’t let it out . Assume mvhr isn’t any help/ relevant to air flow in this situation?!? ?
  7. @Onoff gets brownie points though ?
  8. My filthy joke was lost ...
  9. Sure I’ve had a pint in there
  10. Already fixed those sides . Don’t want the end of the plasterboard hanging on thin air . Funnily enough timber just turned up .
  11. Yeah 600mm centres . Seems rather wide to me . Might still do a noggin every 300mm across them all for peace of mind .
  12. Don’t like these ceiling edges . Ceiling plasterboard would sit on nothing - shove some timber in there . Also assume I need to put noggins in the ceiling at 300mm apart for plasterboard.
  13. Sorting out those awkward angled ceiling bits . Not much fun . They are at approximately the same angle now !! OSB’d them for extra strength .
  14. That was such a crap joke even I missed it !! ??
  15. Din rail is fanless .....
  16. Yeah it’s not the most exciting video - but I was happy . Not strictly ‘ The bridge’ - but will interface to it later . More goodies tomorrow!!
  17. Electronic lock tested ! Nearly wet my pants with excitement!! IMG_1290.MOV
  18. You’re from Cornwall way aren’t you ? No vision - pasties and fudge that’s all ?
  19. Phrased perfectly!
  20. Yes via phone or iPad wall mounted in bathroom or indeed off other ‘inputs’ ...
  21. Decided some fun today ! Poe router fans all replaced ( still noisy but better ) . Mac with Z wave stick . One Qubino din rail dimmer installed ( by electrician! ) linked to one bath room led ceiling light , triggered by aeotec sensor 6 I.e movement put lights on with timer . I’ll periodically update this thread as I add new goodies !
  22. Ordered ! i feel brave today !
  23. Possible match ? https://www.ebay.co.uk/itm/301997023261
  24. Tenant sent me these photo's. I can't get to the site - hard to tell what I need to order to replace these. One of you guys will know for sure!! Appreciated!
×
×
  • Create New...