Jump to content
  • entries
    26
  • comments
    105
  • views
    14958

What a difference a day makes...


dnb

1454 views

There have been a few delays along the way, but now the largest work package is well and truly under way. The last 24 hours has seen the house go from 300mm out of the ground to 2.7 metres.

 

The front door and stairwell on the left and family room doors on the right.

20200701_132810.thumb.jpg.1e75e03f174c721a84085bab91c4be80.jpg  

 

Unloading the second trailer load of parts. Running out of space on site now!

20200701_132848.thumb.jpg.733c223c7d6a0a3f0d13abb5f09b7fdd.jpg

 

First floor joists going in. With another view of the stairwell window

20200701_190302.thumb.jpg.cbe114fd5417f893371ffc3f83705fe3.jpg

 

Inside the lounge

20200701_203324.thumb.jpg.f13d24d34dbda7cee3de68d910e5ff74.jpg

 

Proof that the SIPS team and I had the same plan. Or were very lucky!

20200701_203135.thumb.jpg.6f457f605505094f00a64db3bfd6093a.jpg

 

And tomorrow the team are going to install these parts...

20200701_190451.thumb.jpg.440ac656afa4af3447d90259161afeb6.jpg#

 

It really is impressive how fast the house is going up now.

  • Like 8

4 Comments


Recommended Comments

Really pleased for you. Looks great. 

 

Some rain over the next few days. Will that affect anything?

Link to comment

Thanks! It would be fair to say I am both relieved my bits of the job were to a good enough standard and extremely happy that finally it is all coming together.

The weather will probably slow them down a bit - might loose a day or so - but we've been pretty lucky with the weather so far having seen rain on the other side of the Solent with it still fine on site so I am hoping this continues for at least a couple more days.

Link to comment

Always a great day when the frame starts to go up.

 

I'm with you on the relief that the two bits match up - we had another contractor do the basement and even with re-measuring etc you're still convinced that something will go wrong.

 

Not seen that joist type before, do you just cut your own penetrations for fouls, MVHR, etc..?

Link to comment

I only had myself to blame if the frame and base were different sizes! I laid out the site and built a large part of the blockwork.

 

They are Steico joists. Yes, penetrations are cut in the joist centres where needed. I have been given a set of rules to follow as to spacings and sizes etc. Very much looking forward to getting to that stage now!

Edited by dnb
Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...