Jump to content
  • entries
    26
  • comments
    105
  • views
    14870

The end of the beginning

dnb

Entry posted by dnb

1236 views

 Share

We're back at work. The SIPS team are on the Island and have satisfactory accomodation, and the first load of house is unloaded on site. But before the photos of this, there are the last stages of getting out of the ground and interfacing with the SIPS superstructure.

 

The site foreman early last week doing the final checks of plinth flatness. To the best of our measurement ability all is good - within 3mm in height and 5mm laterally.

20200528_191015.thumb.jpg.a81ffc0bf31bbddc76bba46b0f731260.jpg

 

First to arrive: A new toy! I used to drive one of these in a previous job a long time ago so it would be rude not to test the equipment on hire by moving some bulk bags out of the way. The controls have changed a lot over the years so I had to resort to the instructions for a minute or two. It's a splendid piece of equipment for the job but the boss tells me I am not allowed one of my own.

20200629_083614.thumb.jpg.6aabeb4e266b4ec70c76901b543ac7de.jpg

 

A risk was flagged by the SIPS structural engineer surrounding the choice of light weight blocks for the plinth. He was concerned about blocks splitting when the Expressnail fastnenings were used. (I have seen much discussion on the forum about this sort of problem.) We mitigated this by careful choice of blocks by analysing the specification - only 7N ratings were considered, talking to the manufacturers helplines and practical testing of samples. The winning block is shown below. I put in another three nails without incident getting ever closer to the edges with no incidents so concluded that the blocks would be adequate.

20200626_173610.thumb.jpg.deeb8623f99bd5eb8d7a390ceb1ad08f.jpg

 

The team on site testing levels and beginning to install the leveling plate. All is good - the plinth is suffiicently flat and the blocks are taking the fastenings without incident.20200630_134502.thumb.jpg.27c1f2db02b810e00f5ee00cc0b7ddd2.jpg

 

We should see some walls up tomorrow assuming the weather is supportive of lifting. We can now consider the build "out of the ground" and my homework marked and deemed good enough to proceed. I now need to fully apply myself to solve the puzzle of getting windows and slates on to the Island in the hopefully final weeks of the national lockdown.

20200630_134540.thumb.jpg.3b269630e53169fc5ffd34e1ac1642ce.jpg

 

  • Like 6
 Share

2 Comments

Recommended Comments

dpmiller

Looks good. Those blocks look very like the Quinnlites we used and similarly we've had no issue- expressnails, Hiltis, screws all have gone in firmly without incident.

Link to comment
Mr Punter

Is that a double sole plate?  Where is the finished floor level going to be?  Do you have insulation and screed?

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...