Quooker Installation Questions

[Spinny]

quooker boiling water only tap with Pro3 tank.

Plumber mentioned some people cut a hole in the base of the cupboard and install a dish in the hole so the tank can sit lower into the plinth space.

Anyone ever seen this, done this, point me at the metal dish people inset  etc ?

 

Anyone actually have a shelf in the same side of a cupboard as the tank and cut around it or in front of it ?

 

In fact if anyone has a photo of an installed quooker in a kitchen cabinet it would be helpful. Looking to work out best positioning for tank, and socket etc

[Thorfun]

We had plenty of space under our sink to install it without cutting holes in the base! And we have the cube installed there as well. Have you got a particularly deep sink or something?

[G and J]

55 minutes ago, Thorfun said:

We had plenty of space under our sink to install it without cutting holes in the base! And we have the cube installed there as well. Have you got a particularly deep sink or something?

We're just about to fit the same quooker as above (pro 3) but looking to try and get drawer below, anyone "been there done it" ?

[Thorfun]

57 minutes ago, G and J said:

We're just about to fit the same quooker as above (pro 3) but looking to try and get drawer below, anyone "been there done it" ?

I fail to see how a drawer will fit. It would have to be a shallow drawer to allow the Pro3 to fit behind? And then accessing the unit could be a faff maybe? We just have a wide double door cupboard that has no shelves to give space for all the plumbing and Quooker units. It does all take up quite a lot of space. 
 

sadly I don’t have a photo to hand. 

[Conor]

Yes, I had to cut out a section of our cabinet base as we have a massive sink, water filter and waste disposal unit, just no room for the tank. Looks a right mess but there nothing else in there so door is rarely opened.