Jump to content

Proposed changes to Permitted Development rights for small wind turbine


Recommended Posts

Posted (edited)
24 minutes ago, Roger440 said:

However, things go wrong, especially electronics. Yes it "should" cut of the power if it doesnt see "mains power". Should is doing a lot of heavy lifting on a device thats likely sub £200.

 

The big brands offering things like this cost a more than that. If the regs say that to legally sell this product it 'MUST' ensure that the pins are not live unless a mains signal has been seen within the last 20ms then either the product complies and is safe (ie, wont kill anyone even if they touch live pins) or it doesn't comply and is therefore defective.

 

That should be the end of it.

 

24 minutes ago, Roger440 said:

With a plug in panel, if it doesnt detect the mains power has gone, the pins are live. Single point of failure. 

 

Going to a situation of single point of failure is a significant step backwards. The results of which, as ive already said, are forseeable.

 

Really not sure what you are getting at here. The number of things that have to happen to produce mains output from a solar panel these days is huge. The computers involved in generating the waveforms are far far more powerful than desktop computers from the early/mid 2000s.

 

It's not a case that the waveform will be produced unless blocked by a safety system, it's more that the system can't produce a waveform unless a long list of conditions are met.

 

This is technical but heres a reference design from TI for a microinverter. Not suggesting you take anything from it other than it's not a simple system that will just continue working in a fault condition (the document doesn't touch on the safety side unfortunately).

 

https://www.ti.com/lit/ug/tiduf63a/tiduf63a.pdf?ts=1774517354380

 

The MCU (brain) they use to do the control is this :

 

https://www.ti.com/lit/ds/symlink/tms320f280039c.pdf?ts=1774508361987

 

Again not really an accessible document, but you'll note that it supports various functional safety standards. Those are some pretty rigorous standards and if you design a product to meet them then you can make guarantees about the behavior. ie, make it fail safe. Edit: I'm not saying this is currently part of the regs for this, seems a little OTT for the situation, but it's certainly something that could be added to regs if a need is identified.

Edited by -rick-
Posted

Safety never comes with an absolute guarantee and its all managed/regulated on the basis of what is reasonable.

 

Theres 1600 people killed on british roads each year yet were still all free to drive at potentially lethal speeds.

 

Theres 1000s die prematurely each year due to poor urban air quality yet we can still burn oil/gas/diesel/wood in urban areas.

 

Plug in solar, as with anything at dangerous voltage, might injure or even kill the odd person that misuses it or CHOOSES to personally import it and potentially bypass UK/EU safety regulation, but their loss is likely to be outweighed by the benefits

  • Like 1
Posted
10 hours ago, Roger440 said:

With a plug in panel, if it doesnt detect the mains power has gone, the pins are live. Single point of failure. 

 

Going to a situation of single point of failure is a significant step backwards. The results of which, as ive already said, are forseeable.

I'm pretty sure that within compliant inverters there's multiple layers of disconnection so there's unlikely to be a scenario where a single failure within the inverter will keep the power on the plug

Posted
2 hours ago, Dillsue said:

their loss is likely to be outweighed by the benefits

Is this a principle similar to the self-extinction of vaccine deniers?

Posted
1 hour ago, saveasteading said:

Is this a principle similar to the self-extinction of vaccine deniers?

 Similar to importing hazardous kit from un regulated sources.....the majority can probably evaluate the risks and manage accordingly, those that dont have a higher risk of "self extinction"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...