Harosecur - gimmick or good?

[MortarThePoint]

I've just discovered this plastic strip product that you can put between ceramic surfaces. It sticks to one of them and conforms to the other. My main use would be below floor mounted toilet pans.

 

Has anyone used it or have any thoughts about whether it's worth it?

 

[Beau]

Nice idea if it works.

 

I hate sealing around toilet pans and it never looks good

[MortarThePoint]

13 hours ago, Beau said:

Nice idea if it works.

 

I hate sealing around toilet pans and it never looks good

 

You still need to apply a bead of silicone around the joint when done with this though so I think it's more about avoiding the ceramic on ceramic contact if that is indeed a problem 

[Beau]

1 minute ago, MortarThePoint said:

 

You still need to apply a head of silicone around the joint when done with this though so I think it's more about avoiding the ceramic on ceramic contact if that is indeed a problem 

In which case whats the point?

 

Silicone works just looks poor when it has to be thick, least it does when I do it haha

[MortarThePoint]

@Nickfromwales when you screw down toilets to a completely tiled floor do you use this stuff, pop some silicone between the pan and floor or just sit the pan straight onto the tiles?

 

Definitely needs a bead of sealant around afterwards but wondering if anything between pan and tile?

Edited Tuesday at 18:21 by MortarThePoint

[Barnboy]

@MortarThePoint I noticed something similar looking in the diagrams for my wall hung toilet but couldn't find anything resembling this stuff as there was not any text in the instructions to tell me what it actually was, just drawings. 

I tried putting some Armaflex tape on the back of the loo pan as an isolator but it had too much give in it and the loo flexed when sat on.

@Nickfromwales I'd be interested in your thought on this too please, as my bathrooms are about to be siliconed so I can still easily fit some to my toilets if I need and can get hold of some. TIA

[Nick Laslett]

My floor mounted toilet pan had this less than useful picture in the install instructions. 
 

 

Which I assume is tile adhesive. But I still don’t understand how you can have adhesive on the bottom of the pan and then do all the movement to fit it to the two connections. Wouldn’t it make a right mess?

Edited 1 hour ago by Nick Laslett

[Nick Laslett]

Just found this blog detailing an approach, which I quite like. Install toilet, raise on packers, silicon under pan, place back down. This guy didn’t want to drill and screw mount. 
 

https://www.sunamoon.com/articles/fix-down-toilet-without-screws.htm