Jump to content

Steel placement


Recommended Posts

Hi all,

 

I was walking past a house in my locality that is having renovation work done. 
 

The back of the house has several red pieces of steel passing through the back wall. What is the purpose of these? Is it to hold the wall and internal walls in place? (I have attached a file picture for better explanation) 

 

Who would decide the location of these? Is it down to the contractor or the architect? Is there rules of thumb in regard to the steel being used, i.e steel should be a certain grade and twice the width of the wall it’s carrying etc? 

 

Cheers,

 

 

IMG_0024.thumb.jpeg.34780f501bc6feb2a5280cb9016e6f68.jpeg

 

 

Link to comment
Share on other sites

Yes those are temporary supports holding up the back wall while they insert that big steel beam then it looks like they are going to knock out all or part of the back wall downstairs to join through into the extension.

 

A structural engineer would normally specify that.

  • Like 2
Link to comment
Share on other sites

Absolutely has to be by an SE. Rules of thumb have their place at feasibility stage, but this has to be calculated to suit the individual building. Then the geometry have to be vondidwred eg the beam fits and is below the walls. Then the walls supporting the beam need strengthening, maybe even extra foundations.

  • Thanks 1
Link to comment
Share on other sites

33 minutes ago, Alan Ambrose said:

vondidwred

 

Is that special SE language? 😃

Oops. I have big fingers and the phone rang. But that is no excuse.

"Geometry has to be considered" would have been a better phrase.

Vondidwred,  an obscure term used in vonstruvtion  for vombining practicality with svienve.

Link to comment
Share on other sites

just dont do what my builder did and install the supports onto my old chipboard floor to hold up the rest of the house with some knackered bits of timber... "Rough" would be the word. Horribly dangerous would be another id imagine.

image.jpeg

Link to comment
Share on other sites

51 minutes ago, Super_Paulie said:

just dont do what my builder did and install the supports onto my old chipboard floor to hold up the rest of the house with some knackered bits of timber... "Rough" would be the word. Horribly dangerous would be another id imagine.

 

image.jpeg


😳 at least they landed the supports over a joist, could have been worse

Link to comment
Share on other sites

11 hours ago, ProDave said:

Yes those are temporary supports holding up the back wall while they insert that big steel beam then it looks like they are going to knock out all or part of the back wall downstairs to join through into the extension.

 

A structural engineer would normally specify that.

Thank you Dave.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...