Jump to content

Recommended Posts

Posted

So far there has been no condensation in my DIY unit.

 

However, I am in the design stage of DIY unit 1.1 which will be a much better insulated twin core model.

 

Am I right in thinking, should any condensation form, it will be in the extract (from home) chamber and that is where I should put a drain? Just in case.

Posted
  On 13/12/2023 at 13:53, Coanda said:

Am I right in thinking, should any condensation form, it will be in the extract

Expand  

 

Depends did you get a standard or enthalpy heat exchanger.

 

The enthalpy ones recycle the moisture back into the incoming air. So no condensation will accumulate.

  • 2 months later...
Posted
  On 01/03/2024 at 11:23, Roundtuit said:

They frequently discharge into the house waste plumbing, so should have a trap on it.

Expand  

Does the condensate pipe need to be 40mm?, was thinking of using overflow pipe and chasing it into the wall in order to get it to a drain in our utility. Don't want to be boxing in. Would over flow pipe work?

Posted

Don't see why not, then drop it into a waterless trap in the utility.  The condensate pipe out of my unit is overflow sized; it's only taking a trickle at worst.

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...