Compacfoam supplier UK

[Nickfromwales]

Hi all.

I'm trying to source 20mm Compacfoam ( or an equivalent product ) to be used for the installation of a 5m all glass slider. Need to create a thermal break at the threshold, as well as vertically up both sides of the slider for 5.4m rising ( long story, picking up a not-so-ideal-install off A.N.Other.... ).

Deepest section would be 150mm - 180mm so looking ideally at buying an 8x4 sheet s cut into the sizes I need. The Green Build Store only sell Twix sized pieces so am looking at other options if anyone can help?

TIA. 

[JohnMo]

https://www.partel.co.uk/product/21/5/alma-vert-115-kgm

 

Slightly different product but in sheets 

[Nickfromwales]

I’ll get on the phone Monday. Hopefully ex-stock and I can get it quickly.
Thanks. 

[Dan F]

Number of alternative options, aside from the Partel product.

- https://www.ecologicalbuildingsystems.com/product/phonotherm-200

- https://www.phstore.co.uk/foamglas-perinsul-hl

- https://www.cfsfixings.com/products/purenit

- https://www.greenbuildingstore.co.uk/product/compacfoam-200/

 

We used perinsul foamglass blocks for some sliders and then used purenit (recommended by @craig) elsewhere. The purenit I think was available in a lot of different thicknesses and came in a 2.4x1.2m sheet which was easy to cut down, so might be worth looking at.

[Nickfromwales]

Ah, yes. Forgot about our secret in-house window-weapon. 
Thanks, much appreciated. 

[markharro]

I am being quoted £1000 for Compacfoam 200 for our passive slab by the installer - quantities in the attached image.

Can anyone advise whether its likely I would make much saving on the price by sourcing from GBS myself? Or would one of these other products be cheaper and the same spec? thanks

[JohnMo]

When I bought my compacfoam, I bought from GBS, was cheapest at the time.