DamonHD Posted December 26, 2019 Share Posted December 26, 2019 Unjammed by Jeremy, thank you! Rgds Damon 1 Link to comment Share on other sites More sharing options...
Ed Davies Posted December 26, 2019 Share Posted December 26, 2019 Hi Damon, good to see you around again. How have the house insulation retrofit and TRVs gone? Link to comment Share on other sites More sharing options...
DamonHD Posted December 26, 2019 Author Share Posted December 26, 2019 (edited) IWI is done.* First batch of TRVs (Radbot) made and even being sold on QVC! Fundraising on Seedrs now for the next stage. We had a year of data scientist and product champion which made some really helpful improvements over just engineers fiddling for years! Rgds Damon * House may be CPOed and torn down, which is slightly annoying, but I shall resist getting in all my moaning in on this post... Edited December 26, 2019 by DamonHD 1 Link to comment Share on other sites More sharing options...
SteamyTea Posted December 26, 2019 Share Posted December 26, 2019 42 minutes ago, DamonHD said: House may be CPOed and torn down Are they going to do my old factory as well, that should have been pulled down in the 70's. Link to comment Share on other sites More sharing options...
DamonHD Posted December 26, 2019 Author Share Posted December 26, 2019 (edited) Biscuit factory is already being redeveloped, separately, and Arrow Plastics is long since closed though the building still stands. Rgds Damon Edited December 26, 2019 by DamonHD Link to comment Share on other sites More sharing options...
SteamyTea Posted December 26, 2019 Share Posted December 26, 2019 17 minutes ago, DamonHD said: Arrow Plastics Was on life support when I was there. I did speak to Patsy not so long ago, may have to track her down and see what they are all up to. Link to comment Share on other sites More sharing options...
DamonHD Posted December 26, 2019 Author Share Posted December 26, 2019 https://beta.companieshouse.gov.uk/company/04727143 20 Nov 2019 SOAS(A) Voluntary strike-off action has been suspended Link to comment Share on other sites More sharing options...
SteamyTea Posted December 26, 2019 Share Posted December 26, 2019 11 minutes ago, DamonHD said: 20 Nov 2019 SOAS(A) Voluntary strike-off action has been suspended Someone is in trouble then. Link to comment Share on other sites More sharing options...
Nickfromwales Posted December 27, 2019 Share Posted December 27, 2019 Hi Damon. Good to see you posting here. Apologies for the glitch. Link to comment Share on other sites More sharing options...
DamonHD Posted December 27, 2019 Author Share Posted December 27, 2019 Hi Nick - I've survived, somehow! Link to comment Share on other sites More sharing options...
Jeremy Harris Posted December 27, 2019 Share Posted December 27, 2019 On 26/12/2019 at 15:39, DamonHD said: Unjammed by Jeremy, thank you! Rgds Damon Hi Damon, and welcome, Sorry for the glitch and long delay, but glad to see that we managed to finally get things working. Link to comment Share on other sites More sharing options...
DamonHD Posted December 27, 2019 Author Share Posted December 27, 2019 I don't think I'd call that a glitch since I tried many (3, 5, 7?) times over several years to get in, eg by communicating the route that you eventually responded to Jeremy! More like a minor rend in the fabric of space time... Auditors leaking through and all that... B^> But I didn't help myself by apparently mistypxiung my email address when trying to sign up, did I? Rgds Damon Link to comment Share on other sites More sharing options...
Jeremy Harris Posted December 27, 2019 Share Posted December 27, 2019 TBH, we've only managed to get the forum contact email to work in "receive" mode very recently; before then I had no way of seeing what was coming in via that route. We still have to fix the forum email "send" functionality, not at all sure why that doesn't work, but it's not for want of trying to fix it. Link to comment Share on other sites More sharing options...
DamonHD Posted December 27, 2019 Author Share Posted December 27, 2019 BTW, where does one ask for sage advice on matters of forum etiquette here? Is there a magic email for example, that I should use? (I think that we've established that the route that was obvious to me has a large effective latency!) All who know me already know about my pet carbon-cutting project (nearly an overnight success after ~7 years!) and that yes we have that fundraising on, but also I may be able to gently make coupons available for people here for the current product, blah blah blah. And keen though I am, I also don't much like being marketed at... Please admins delete this posting at whim. It's a tricky one. Rgds Damon Link to comment Share on other sites More sharing options...
Jeremy Harris Posted December 27, 2019 Share Posted December 27, 2019 There's some stuff here: https://forum.buildhub.org.uk/guidelines/ and the terms and conditions are here: https://forum.buildhub.org.uk/terms/ Link to comment Share on other sites More sharing options...
DamonHD Posted December 27, 2019 Author Share Posted December 27, 2019 Hadn't seen the former, will consult! At first glance it appears as I'd expect it to. Rgds Damon Link to comment Share on other sites More sharing options...
DamonHD Posted December 28, 2019 Author Share Posted December 28, 2019 Last question on this thread, and I don't want to be wading in with my big muddy boots where I shouldn't... Where would be the best place to start a thread on this: http://www.earth.org.uk/note-on-solar-DHW-for-16WW-UniQ-and-PV-diversion.html which @Nickfromwales amongst others has been helping me with quietly? Note that I'm concentrating on just the DHW part for now. Rgds Damon Link to comment Share on other sites More sharing options...
SteamyTea Posted December 28, 2019 Share Posted December 28, 2019 (edited) Plumbing threads. Just had a quick skim of the link. "energy can only be extracted not stored," Not sure I understand that. Edited December 28, 2019 by SteamyTea Link to comment Share on other sites More sharing options...
DamonHD Posted December 28, 2019 Author Share Posted December 28, 2019 OK, will try to start a plumbing thread. Be gentle on me. @SteamyTea I've tried to improve those words a bit, thanks for the feedback. Rgds Damon Link to comment Share on other sites More sharing options...
TerryE Posted February 3, 2022 Share Posted February 3, 2022 @DamonHD, I was scanning another topic and I have just noticed that an old member is back (from eBuild days that is). So a belated hello and welcome again ? Jeremy has gone cold turkey on the forum, so some move on and some return. BTW, I liked your Thermal Imaging Survey blog post. It's a pity that this stuff isn't more accessible to member here. Link to comment Share on other sites More sharing options...
DamonHD Posted February 3, 2022 Author Share Posted February 3, 2022 33 minutes ago, TerryE said: @DamonHD, I was scanning another topic and I have just noticed that an old member is back (from eBuild days that is). So a belated hello and welcome again ? Jeremy has gone cold turkey on the forum, so some move on and some return. BTW, I liked your Thermal Imaging Survey blog post. It's a pity that this stuff isn't more accessible to member here. I've been posting here, intermittently. Life has been getting in the way. Articles like the thermal imaging one are intended to be informational rather than selling anything. What more should I do (or have done) to get them to people who would benefit? Rgds Damon Link to comment Share on other sites More sharing options...
Nickfromwales Posted February 3, 2022 Share Posted February 3, 2022 22 minutes ago, DamonHD said: I've been posting here, intermittently. Life has been getting in the way. Articles like the thermal imaging one are intended to be informational rather than selling anything. What more should I do (or have done) to get them to people who would benefit? Rgds Damon You can add links here, in line with T&C's. Fill your boots. Dust needs blowing off sometimes, like this thread has now provoked these replies Link to comment Share on other sites More sharing options...
TerryE Posted February 3, 2022 Share Posted February 3, 2022 (edited) 1 hour ago, DamonHD said: Articles like the thermal imaging one are intended to be informational rather than selling anything. What more should I do (or have done) to get them to people who would benefit? TBH, I post my stuff in blog here, and then copy the content to my own hosted blog. Edited February 3, 2022 by TerryE Link to comment Share on other sites More sharing options...
DamonHD Posted February 3, 2022 Author Share Posted February 3, 2022 My earth.org.uk host is my primary place for putting anything substantial, and I do post links in here when I think there is something interesting to see, but I don't want to annoy everyone! Rgds Damon Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now