Search the Community
Showing results for tags 'ts'.
Found 4 results
-
Hey Googling it but can’t find it ! want a device that cuts off water flow after say 10 mins , then resets after a period of time . Trying to control how long people shower for in a rental property where I pay the bills !! cheers
-
@Nickfromwales Telford seem a good bet for supplying my UVC. As per other post on UFH with rads but I will now site the tank in the cellar and have an external boiler (fluing from the cellar is a pig and looks expensive). So presume new system boiler and UVC or TS. Can't invest in solar now, or air-source hp as no funds left. See system below I got quoted from Greensquare. Should I not have a buffer if going uvc?
-
Hi there, I'm not sure which forum to post this in, so I've taken a best guess I'll be starting large extension build next year which will involved installing a new external Oil Boiler connected to a hot water cylinder on the ground floor. unvented I believe, as there is nowhere to put a header tank? in the upstairs of the old house. The old part of the house is over two floors and will remain heated by radiators. the new extension will be underfloor heating. part of the extension is a large (to me) open plan area with a woodburner in it. now that I'm firming up the build, I'm wondering if there is any way to connect a woodburner to a cylinder, on the same floor level? Attached is a diagram of the current layout, there is hot water cylinder in a utlility room roughly 17m from the woodburner. the utility room is a single storey extension. I believe the proposed cylinder is unvented, which I guess it would need a pump to heat the radiators upstairs in the old part of the house. has anyone successfully been able to connect a woodburner/boiler stove on the same floor? .I have my doubts, but its worth a shot as I have access to an almost unlimited supply of firewood, I'd love to heat the radiators via woodburner as much as possible. I'm just in the process of engaging a builder, and would like to be able to speak to his plumber with some degree of understanding. any pointers, much appreciated.
-
Mostly for Nick but anyone can chip in. Our upstairs had to be re-designed on the fly as the house worked out bigger than on the plans and we were trying to make use of the space. Long story short every little move had a knock on effect, and some things got missed. SO Our hotpress is now only 850mm deep by about 2m I was hoping to get extra insulation around my tank be it UVC or TS (Nick I havent decided yet) Will i be able to get extra insulation with only 850mm to play with? Will i be able to fit any sort of tank in 850mm (will all connections be able to be fitted on one face etc?) Cheers Damian
