Pocster

Yeah could be. It is quite bizarre though that a wheelchair'd person could enter the property and use the bathroom but couldn't get down the stairs anyway to the kitchen!. I appreciate this door design in say a bungalow . We will probably go for a pocket door - solves all the issues.

What about a steel sheet bolted across to make this extra floor? Surely I don't need an SE for this - cost more than the steel...... Oh architect! ; please design stuff; not just nice pictures.....

OK; I will - thanks Now guys!; this Nib!!!

Crumbs!; there's some reading there!. Thanks for that!. I do see that the door usually opens outwards .... straight into the face of the occupant leaving the bedroom! Though I could integrate a sliding i.e. expensive door for the bathroom.......

Ok!. But if it opened inwards would the opening width not be the same??? By the drawing I would *assume* with a door inwards you could still get a wheelchair in. If I do change this am I likely to get in trouble from BCO?????

Hey all, Firstly happy Easter!; not too many eggs now ...... Please see plan attachment.My subtle arrow shows a floor 'nib'; but how do I construct this? There's a steel running parallel to it (can supply photo if that helps). But how do I build this self supporting bit of floor??? Also; opinions please. The architect has the bathroom door opening into the hallway and potentially someone's face as they leave the bathroom. Surely the bathroom door should open inwards? i.e. into the room. Or is there a potential reason he designed it like this that I am missing??? Thanks all!!

Bco thought 50mm insulation was fine . perimeter ? What do you mean exactly ? The insulation upstand ? Cheers

BCO is out today ;I'll see what he thinks - usually he is somewhat dis-interested!

Wow!; that's a chunky floor!

Shouldn't be ; apart from 1 - it's placement won't change . Tf guy said just to do bricks for tf base on internal walls I.e thinner

The tf guy said to check with boc if insulation as well in timber frame void . the tf at 140mm sat on b&b ; at the edge of b&b which in turn is sat in reinforced concrete walls . So nothing should be sat on un supported b&b if that makes sense . cheers

Inner supporting walls???? Timber frame guy 'suggested' . Timber frame; insulation in-between (though check with BOC); membrane; then batten to allow for utilities + plasterboard and skim. So breathable membrane 'outside' (though still behind insulation and external blockwork) ; internal vapour barrier (???); just truing to make it super air tight I guess, Cheers

Bristol. I have usually used Kellaway ; haggle a good price. But that link above I've given seems a good bit cheaper than TP!

A new google attempt at 'concrete 140mm commons' brings me this http://www.carvers.co.uk/products/BRICK-PD-CONCRETE-215X140X65MM-COMMON-320-PER-FULL-PK/P110012 I have learn't that the wording is everything when you aren't sure what you are looking for!!

Ah I see. Sorry I thought you got it wrong!! This 2 course wall is the 'internal' wall just for the timber frame to sit on. My external wall is thermalise with 150mm insulation behind it. So I'm not sure the thermal performance of the blocks against the B&B is a great issue????; it maybe though!!! BCO is coming tomorrow. From my experience he genuinely won't be that interested!!. I 'felt' it was expensive; but trying to find similar online at a sensible price is challenging . Appreciate all the help!

Only 100mm wide

https://www.travisperkins.co.uk/Pd-Edenhall-Concrete-Common-22N-Solid-Brick---Pack-of-320/p/361730?gclid=CMuotqqmn9MCFUu6GwodbmoMSA This not better? 2 courses?

ok!

Down there at the moment; it's dark, damp, wet and very frightening! ; so yes! just like a dungeon!!!

Thanks. Yes he said +/- 10mm ; but 'preferred' +/- 5mm .... Going to stick my rotating laser guide in the centre so it's spinning dot just clips the top of a corner block then I know for each corner should be the same. Seems like a fair way to get level with acceptable tolerance.

I did. They have nothing at 140mm. Just 'standard' block sizes.

I think the timber guy wants height of 140 and also width 140. He said a 140x140mm block (which I can't find). I could just lay a block 'flat' ( Concrete Block, 440x215x140mm) ; so it's 215mm height rather than 140mm. What worries me is the step in width i.e. 215. Does that matter??; means for example UFH won't 'reach' the wall....

They've never heard of them - builders merchants.

Ceiling heights are around that.

Difficult to find a price online. I'm guessing everyone else isn't using these ; otherwise they would be common...... ; which means I'm doing it wrong!