Pocster

I really wouldn’t worry about this unless you are constantly transferring huge amounts of data around your network . Get an unmanaged poe switch ( netgear for example ) . Plug it all in - sorted 👍

Temped to punt on the euro version

You know when it’s released in the U.K. ?

I’ve got doorbird but I’m eyeing the yet unreleased reotek 5k one ….

Lol yes ! Any correctly wired indeed …

I’m installing one to find out !

I probably have .

Eh !!!!!????

Open source . 2000usd https://fb.watch/ifPhq1ZdEB/ It’s a “ Buy Now” for sure !

Any cat 5 + cable will be fine for poe

Some progress . Need a 🍷 break now

Tbh I think it’s all BS . My council say ALL new builds must conform to the suds rules . Needless to say I found easily planning applications where it wasn’t even mentioned or if it was mentioned the “ condition “ wasn’t met . So the argument wasn’t difficult to win . Though I still had to pay for the condition to be noted as not met . 🙄

I guess what I’m trying to say is if it’s impossible to implement you may be able to get it ( kind of ) waived .

I had this issue also . It meant in effect I couldn’t do my build as 7m away from property and 2m away from boundary was impossible. So this ‘issue’ for suds was waived though noted “ did not comply “ by the council ; once I complained.

I agree - perception is the key . A tenant will moan their room isn’t 21 degrees . It’s actually 20.5 . They request I turn it up to 22 . I do nothing . Hour later ask them if that’s better - they say yes .

Yeah I’ll probably do that as it should ‘square ‘ it . I’d just rather the frame was all square and fixed I.e rigid .

Funnily enough it ain’t ( according to instructions ) . 2 hangs per main runner . Max there will be 4 main runners - so it’s no problem. The ‘wedge’ fixings into concrete work surprisingly well . I just don’t get how this is held square ( apart from the tiles ) . Still I’ll knock this shit up and we will find out when SWMBO accidentally knocks it and the entire ceiling comes down 👍

Struggling with this - thought it would be so easy . I just don’t get how the system works . Wire hangers . Too loose and they aren’t taking the weight of the main struct . Too tight and it hovers . No easy way to adjust ( twist and hope ! ) . Is there something better than hanger wire for a concrete ceiling ; that you can adjust the height as you go ? The main structs ( all structs ) that sit on the wall trim . They just sit there - not fixed . This ‘mesh’ isn’t going to have rigidity. The only thing stopping it swaying and moving will be the tiles . Am I doing this wrong ? ( seen on some USA video they rivet to the wall trim ) . Any advice welcome 🙄

Now there’s a question ! 🙄

Were you at the blue parrot Friday ?

Have changed the ufh temp ; nothing else . Will report back after a few days . Overshooting desired temp is rare . Floor coverings are non existent …

Pump speed is low . Have the self regulating actuators so flow and return don’t deviate much . I guess it’s the SWMBO factor - which is hard ( impossible ) to define ….

😁 - titles not helpful ! So with wet ufh ; what’s the relationship between the pumps speed , the ufh water temperature and the actual air temperature ( I.e the bit SWMBO complains about ) . We were running at a ufh temp of 30 degrees which Google implies is bitchingly low . Just set to 34 . Need hours to see how it affects air temp . But pump speed relevance ??? Essentially how do I balance these parameters to get the air temp I want ?

Wft a tack bloc ? . Googling showed me a semi nude female tied down over my bed . Presume you didn’t mean that ?

Or uss (expletive deleted) erprise . Sole mission to discover (expletive deleted) ups and new builds in the twat galaxy