Pocster Posted February 21, 2019 Author Posted February 21, 2019 2 minutes ago, Onoff said: Again, look no further than Lidls Cepa Lebrel Rioja Reserva! Also highly recommend the 14.5% Pinotage. Come to think of it I must be about 2 weeks dry. Haven't had caffeine for a week either. The headaches have pretty much subsided. Headaches subsided ? But so’s the grouting ??
Pocster Posted February 21, 2019 Author Posted February 21, 2019 Just now, pocster said: Headaches subsided ? But so’s the grouting ?? Lidl’s , Aldi EU muck ! I blame brexit
Onoff Posted February 21, 2019 Posted February 21, 2019 5 minutes ago, pocster said: Lidl’s , Aldi EU muck ! I blame brexit Chateauneuf du Pape in there was less than a tenner! 1
Pocster Posted February 21, 2019 Author Posted February 21, 2019 Just now, Onoff said: Chateauneuf du Pape in there was less than a tenner! Ok - I’m going there !
Onoff Posted February 21, 2019 Posted February 21, 2019 (edited) 3 minutes ago, pocster said: Ok - I’m going there ! If they've none try the Vacqueyras (very similar)! Edited February 21, 2019 by Onoff
Onoff Posted February 21, 2019 Posted February 21, 2019 (edited) 5 hours ago, pocster said: Lies ! Quick vid...£150 and I'll stick any label on it you want! Edited February 21, 2019 by Onoff 2
Onoff Posted February 21, 2019 Posted February 21, 2019 I only had a scrap of 2"x1" handy to do my vid so the "stud" is only an inch deep. With a 4"x2" for some reason the sensor "stutters" less.
Simplysimon Posted February 21, 2019 Posted February 21, 2019 7 hours ago, pocster said: Doesn’t work does it ? £8 didn’t , £70 doesn’t . FFS ! . I get the impression on the reviews that some people have better luck with these than others . just read the whole post about water softeners etc. this sounds familiar 1
Pocster Posted February 21, 2019 Author Posted February 21, 2019 16 minutes ago, Onoff said: I only had a scrap of 2"x1" handy to do my vid so the "stud" is only an inch deep. With a 4"x2" for some reason the sensor "stutters" less. Yours does indeed work . You must use special stud !
Onoff Posted February 22, 2019 Posted February 22, 2019 (edited) 13 hours ago, dpmiller said: is the fact that there's no PB maybe confusing it? @pocster, I think he's correct. The couple I have here have to have a "baseline" to start from which is when you place it on the wall and press the button on a bit of board with nothing behind. It has to stay in that plane which you do by keeping tight against the board. If you pull away from the board it cocks it up. You're undoubtedly doing that waving it around in free air. Clamp a bit of board to your stud and have another go I would. Keep away from the clamp of course. Edited February 22, 2019 by Onoff
Pocster Posted February 22, 2019 Author Posted February 22, 2019 6 hours ago, Onoff said: @pocster, I think he's correct. The couple I have here have to have a "baseline" to start from which is when you place it on the wall and press the button on a bit of board with nothing behind. It has to stay in that plane which you do by keeping tight against the board. If you pull away from the board it cocks it up. You're undoubtedly doing that waving it around in free air. Clamp a bit of board to your stud and have another go I would. Keep away from the clamp of course. Yeah I did do exactly this first of all . Shoukd of videod that really . Anyway the 2 sent back ...
Pocster Posted February 25, 2019 Author Posted February 25, 2019 Does it work? Does it F....... IMG_8940.mp4
Pocster Posted February 25, 2019 Author Posted February 25, 2019 The hunt for another ‘not stud finder’ continues .....
Pocster Posted February 25, 2019 Author Posted February 25, 2019 (edited) Tacklife dms03 ordered ffs ! I blame brexit Edited February 25, 2019 by pocster
Simplysimon Posted February 25, 2019 Posted February 25, 2019 1. take a hammer, gently tap wall until note changes, take 1 nail approx 50mm wire, hit nail gently into wall where you think stud is. if it doesnt hit timber move nail to side where stud is thought to be, repeat previous step until stud found. 2. to other side of stud repeat above until edge is found, mark midddle of stud. 3. repeat as necessary along wall. costs - minimal, accuracy - quite high. works on pipes and cables but results are more interesting.? 2
Pocster Posted February 25, 2019 Author Posted February 25, 2019 The technology must exist ! . Personal quest to find it !
Simplysimon Posted February 25, 2019 Posted February 25, 2019 it does, see two posts up, if nail is lost another is easily found ? 1
Gone West Posted February 26, 2019 Posted February 26, 2019 https://store.walabot.com/uk/walabot-diy-pack.html Seems expensive but reviews not bad.
Pocster Posted February 26, 2019 Author Posted February 26, 2019 3 hours ago, PeterStarck said: https://store.walabot.com/uk/walabot-diy-pack.html Seems expensive but reviews not bad. I iOS version ?
Gone West Posted February 26, 2019 Posted February 26, 2019 1 hour ago, pocster said: I iOS version ? Sorry.
Pocster Posted February 26, 2019 Author Posted February 26, 2019 42 minutes ago, PeterStarck said: Sorry. Android rubbish only ?
Gone West Posted February 26, 2019 Posted February 26, 2019 3 hours ago, pocster said: Android rubbish only ? You must be right, I can only apologise again. Mind you there are a lot of insane people around . 1
Pocster Posted February 27, 2019 Author Posted February 27, 2019 Tacklife briefly tried at home - doesn’t look good ....
Pocster Posted February 27, 2019 Author Posted February 27, 2019 In preparation for the tacklife to fail ordered the imex .
Onoff Posted February 27, 2019 Posted February 27, 2019 Just now, pocster said: In preparation for the tacklife to fail ordered the imex . FFS you spend money on stud fiinders like I do on silicone! 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now