Time for clocks ( see what I did there )

[Pocster]

Me and my mate Claude have been on yet another side project .

Bit of wiring adjustment, diffuser Perspex sheet on top and then some neat edging trim.

 

Claude’s description:

 

A 1200 × 1000mm wall-mounted LED clock. The digits are made of 460 WS2812B addressable RGB LEDs in 3D-printed 20mm-deep light cells behind an opal acrylic diffuser, driven by an Adafruit Sparkle Motion (ESP32) running ESPHome. A separate date and weather row uses two P10 RGB LED matrix panels driven by a Huidu HD-WF2 controller (ESP32-S3), also on ESPHome. Both controllers connect to Home Assistant over Wi-Fi for time, weather and control (colour styles, animation speed, brightness, 12/24-hour time), and everything runs from a 5V supply.

Edited 18 hours ago by Pocster

[Mr Punter]

At last a post I understand.  The Avalon local LLM was rather beyond me.  Picture of it lit up please.

[marshian]

Just how bad is your eyesight?

[Pocster]

14 minutes ago, marshian said:

Just how bad is your eyesight?

I looked for clocks I like . None are big and ‘wow ish ‘ ( or cost mega money ) . So only option was as a girlfriend once said to me “ go big or go home “ 

[SteamyTea]

What is the code top make is spell out BOOB

 

A man walks into a clock shop and plonks his todger on the counter in front of the young, attractive, female shop assistant, as says "I need to help with this"

The shop assistant is rather quick and says "This is a clock shop, not a cock shop, Sir."

To which the man replies "Then just put two hands on it"

 

(I heard this from a Bristol lad back in 1975)

Edited 11 hours ago by SteamyTea

[Pocster]

9 hours ago, SteamyTea said:

I heard this from a Bristol lad back in 1975)

I was that lad who worked in a clock shop 

[SteamyTea]

4 minutes ago, Pocster said:

I was that lad who worked in a clock shop 

The horror of horology

[Onoff]

Pretty sure you meant to drop the L in the title...

[Eric]

Are we actually going to see it working? 👀