Shower Tray Question

[dilligaf99]

Looking to replace my 760x760 shower tray up in the bathroom to a 760x1000. Can I do it without using a riser kit and also can I use a low level tray with the trap sunk into the floor boards?

[nod]

Yes and Yes

[Russell griffiths]

If you don’t give a f##k you can do what you want 😂

everything is possible, you might need to move a joist to allow room for the trap. 
you might need to buy a tray that has a different position for the trap

lots of options

you need to establish what you have under the floor and how the new waste will connect to the original in floor pipework. 
most showers are a bodge up of poor pipework, flexi wastes and generally a complete pile of crap. 
it’s a pain but you will most likely need to rip the old one out and then come back with some pictures of what you have under there. 

[joe90]

7 minutes ago, Russell griffiths said:

you need to establish what you have under the floor and how the new waste will connect to the original in floor pipework. 

As @Russell griffiths says.