lookseehear Posted 22 hours ago Share Posted 22 hours ago On 15/01/2025 at 16:30, lookseehear said: I came up with a solution for this today. I bought a couple of packs of these driveway grids https://www.wickes.co.uk/Wickes-Ground-Grid-Base---100-x-100cm/p/236266? which are 250x250 and come in a pack of 4. They cut really easily with a track saw, so I've cut them into roughly 120mm wide strips. Should do the job nicely. 'Fluffy stuff' as my builder calls it is going in. Seems pretty easy to work with. And here's the jig for cutting the cavity tray profile. Straight cuts are super straightforward, but on an angle it's a lot trickier to hold the line. 1 Link to comment Share on other sites More sharing options...
Pocster Posted 21 hours ago Share Posted 21 hours ago I remember when I insulated my slab . I put pir down , filled all the bits so nice and tight . Polythene over the lot , taped and up the walls all ready for screed . I thought I’d get the screed guy to look first - make sure it was ok . He started swearing . I asked what I had done wrong !? He said nothing . But no one fills in all the pir gaps . We just pour the screed and watch it push the pir apart as it flows into the void . Then the owner complains of cold spots in the ufh . This tells me a specific person on a specific trade can be sloppy / don’t care / naive - clearly not everyone though . Link to comment Share on other sites More sharing options...
Roger440 Posted 20 hours ago Share Posted 20 hours ago 59 minutes ago, Pocster said: I remember when I insulated my slab . I put pir down , filled all the bits so nice and tight . Polythene over the lot , taped and up the walls all ready for screed . I thought I’d get the screed guy to look first - make sure it was ok . He started swearing . I asked what I had done wrong !? He said nothing . But no one fills in all the pir gaps . We just pour the screed and watch it push the pir apart as it flows into the void . Then the owner complains of cold spots in the ufh . This tells me a specific person on a specific trade can be sloppy / don’t care / naive - clearly not everyone though . Same when i did my garage base. Spent forever getting the thing bob on. Then insulation over, again, no voids taped etc. Concrete guys arrived and asked who did it. Reckon it was the best prep they had ever seen. Certainly doesnt say much for what they usually see. 1 Link to comment Share on other sites More sharing options...
lookseehear Posted 18 hours ago Share Posted 18 hours ago You could eat your dinner off that! Link to comment Share on other sites More sharing options...
Pocster Posted 18 hours ago Share Posted 18 hours ago (edited) Right ! Photos of mine now ! Edited 18 hours ago by Pocster 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now