andreas Posted April 1, 2024 Share Posted April 1, 2024 Meter tails need to be moved but they need to be run in conduit for mechanical protection through a cavity. Due to route they will take they can't be fitted in a single conduit as it's too big to fit past a steel. Is there any reason that the individual tails couldn't each be run in 20mm conduit (which will clear obstruction) and just have 3 gland nuts either end? There is loads of room to do that and it would make it simple. Link to comment Share on other sites More sharing options...
Mattg4321 Posted April 1, 2024 Share Posted April 1, 2024 If steel conduit then no because of risk of eddy currents. If plastic then I don’t see what the conduit is offering. Can you run in SWA as it sounds like meter tails are not ideal here? 1 Link to comment Share on other sites More sharing options...
ProDave Posted April 1, 2024 Share Posted April 1, 2024 On a related point, even passing meter tails through separate holes in a steel cabinet can cause issues. If you have to do that, put a hacksaw cut between the 2 holes. 2 Link to comment Share on other sites More sharing options...
andreas Posted April 5, 2024 Author Share Posted April 5, 2024 Thank you will both will look at SWA Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now