Adam2 Posted May 6, 2023 Share Posted May 6, 2023 Have a couple of nuaire mvhr units and looking at upgrading filters. Would this be suitable to attach into the existing frames? If not any links appreciated. Link to comment Share on other sites More sharing options...
dpmiller Posted May 7, 2023 Share Posted May 7, 2023 yep, that should be fine 1 Link to comment Share on other sites More sharing options...
Blooda Posted May 11, 2023 Share Posted May 11, 2023 You may need to check that you unit is suitable for F7 as that is pretty strong [not sure if that's the right word] filter, and may affect performance if the unit isn't rated for it. 1 Link to comment Share on other sites More sharing options...
JohnMo Posted May 11, 2023 Share Posted May 11, 2023 The open area of the filter will be much smaller, than current filters, (assume not F7) causing a large pressure drop, you may have to up the fan speed considerably to get the same flow rates as you currently have. 1 Link to comment Share on other sites More sharing options...
Adam2 Posted May 15, 2023 Author Share Posted May 15, 2023 Ok thanks will check on that. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now