Alexx Posted August 13, 2022 Share Posted August 13, 2022 (edited) One of the sides of my wall is around 10mm off level to my door frame as I built up 3 layers of plasterboard with tecsound in between to lower the noise transfer, as this is a home office. I was thinking about how to fill this gap with a strip of wood, but I need to plain it at an angle and I've no idea how I can best achieve this. maybe there is a DYI friendly tool to assist with that? I was thinking even about using a wood filler, but I guess it would be too much at the top where the difference is 10mm, but maybe at the bottom where there is little difference it would work? I hope the pictures help getting a better idea? Thanks! https://imgur.com/a/SP29XIm Edited August 13, 2022 by Alexx Link to comment Share on other sites More sharing options...
Mr Punter Posted August 13, 2022 Share Posted August 13, 2022 Could you use a corner moulding on this side instead of architrave? Link to comment Share on other sites More sharing options...
Conor Posted August 13, 2022 Share Posted August 13, 2022 We had this. Joiner ripped sheets of MDF to make full depth door stops that finished flush. Then architrave. Link to comment Share on other sites More sharing options...
Iceverge Posted August 13, 2022 Share Posted August 13, 2022 +1 for ripped MDF Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now