Jump to content

Enerphitish Renovation – Air Quality


Recommended Posts

Our Enerphit’ish renovation is well underway and am thinking ahead regarding air quality both from the point of at project completion and ongoing thereafter.

 

I have got a thing about particulates, e.g. PM2.5, particularly (hah) because of the idiots (we are inner London) and yummy parents who have installed wood burners which have previously caused serious breathing problems for us in our very drafty Victorian.

 

I also have been ruminating about Formaldehyde off gassing particularly immediately post renovation.

 

So some thoughts, and would be interested in any feedback:

 

Materials

We will be largely using wood fibre IWI but I still need consider its formaldehyde content.

Also, use of MDF, e.g. for built in furniture / kitchen units, which is available as low / zero Formaldehyde products such as from Medite, who were incredibly helpful when I called them up.

 

Project completion

In researching PM2.5 air quality monitors came across a very interesting website https://smartairfilters.com/en/which has lots of very useful info in particular  https://smartairfilters.com/en/blog/how-to-run-formaldehyde-cookout/#more-20301 which outlines an approach to accelerate formaldehyde gassing off after a renovation. I am very tempted to do this but need to understand what the impact might be to our planned engineered wood flooring on basis I would use temporary electric heaters to raise the house temperature and how I would need to set the MVHR (will be Zehnder enthalpy unit).

 

Ongoing

 

 

  • Cooking 
    Inevitably am going to have recirculating hob extractor but am either going to add an active carbon filter or something like the https://www.plasmamadefilters.co.uk plasma unit though would be interested to know how effective these actually are. Also, there will a MVHT ceiling extract in the ceiling somewhere.

 

Link to comment
Share on other sites

Why are going for an enthalpy mvhr in the UK?  There is really no point, we don't have the sustained cold temperatures, which lead to internal air drying out - which is what the designed to combat.

  • Like 1
Link to comment
Share on other sites

Hi @JohnMo wish to ensure relative humidity levels are maintained between 50-60% as we will have extensive and very expensive wide plank wood flooring throughout. 

 

We are based in London and our house has always been very dry - there are just the two of us and it is large and being an old Victorian is (was) very drafty - I monitored relative humidity from Jan through April which was between 35 - 40% so have concluded that our energy improvement measures particularly MVHR might even further reduce this at worst. Therefore, de risking with enthalpy unit. 

 

Thank you for your feedback.

Do you have any thoughts regarding @Ultima357 solution re wood smoke? This is probably my greatest concern going forward. Wood burners are a fashion accessory in these parts along with farrow & Ball etc.

Edited by offthepiste
Link to comment
Share on other sites

3 minutes ago, offthepiste said:

Do you have any thoughts regarding @Ultima357 solution re wood smoke? This is probably my greatest concern going forward. Wood burners are a fashion accessory in these parts along with farrow & Ball etc.

Move to Cornwall. One of the most polluted roads in the country is here.

 

Link to comment
Share on other sites

@SteamyTea Wow ... whilst I live down "in the smoke" pollution from vehicles, at least where we live, is thankfully not an issue though we support the low emission zones.

 

Our neighbours, typically yummy, tend to own at least two vehicles one of which is usually of the 'Chelsea tractor' massive 4x4 type. We even have one who has two Land Rover types with multiple jerry cans strapped to the roof - I suppose I was young once.  

Link to comment
Share on other sites

It be worth digging around on here as I have seen reports of condensation of triple glazed windows with enthalpy MVHR. Your relative humidity levels seem very low compared to a London monthly RH of between 75 and 60.

 

average-relative-humidity-united-kingdom-london.png

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...