Skip to content
View in the app

A better way to browse. Learn more.

BuildHub.org.uk

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Hep2o (Hep20) Information

Featured Replies

  • Author
5 minutes ago, garrymartin said:

Reverse a clamp head and use it as a spreader between the two? Couple of pieces of softwood against the threads to protect them?

 

You may need to pick away at any visible adhesive and/or grout if they are really bedded in, but strange if they are.

 

Hi stakes stuff, I'm a bit chicken on this since if something breaks I'm in a world of pain

  • Replies 104
  • Views 25.8k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Nickfromwales
    Nickfromwales

    Have you allowed for the restriction of the outlet that each pipe terminated into? VS what will come out of the end of the pipe?   All completely academic imho, as larger pipes / higher dyna

  • Nickfromwales
    Nickfromwales

    My apologies 🙄.  Yes, olive eating into pipe, and the fact that the whole functionality of the olive is to compress onto something rigid, which reinforces by design how it is lunacy to turn / tighte

  • Nickfromwales
    Nickfromwales

    I'll wrap this up for you, as I do not have capacity to recall all the insurance jobs I've been through and everything in between. Apologies if this is a little concise.    A 'plumber' with

Posted Images

41 minutes ago, MortarThePoint said:

 

Hi stakes stuff, I'm a bit chicken on this since if something breaks I'm in a world of pain

 

I get that, but what's your alternative? It's difficult to see how much leeway you may have and how embedded the fitting is, because the focus is on the rule rather than the fitting.

 

What's going over the top to conceal it? Does that give you enough coverage to enlarge the hole slightly? Could you get a diamond holesaw over the top of the existing fitting to clear a little tile and adhesive/grout? You'd possibly need a template/guide to keep it from moving around, but it might be the best option to give you some play if it really is solid. Cut a hole in a spare tile. Stick that to the wall with something temporary (silicone?) to give you a guide?

 

image.png.da48cf3a8ce7f958af78f1bfaf4a2758.png

  • Author
1 hour ago, garrymartin said:

I get that, but what's your alternative? It's difficult to see how much leeway you may have and how embedded the fitting is, because the focus is on the rule rather than the fitting.

 

What's going over the top to conceal it? Does that give you enough coverage to enlarge the hole slightly? Could you get a diamond holesaw over the top of the existing fitting to clear a little tile and adhesive/grout? You'd possibly need a template/guide to keep it from moving around, but it might be the best option to give you some play if it really is solid. Cut a hole in a spare tile. Stick that to the wall with something temporary (silicone?) to give you a guide?

 

Good thought, but I think it's all pretty solid.

 

I tried some 25mm Amazon decorative covers/Escutcheon with the 46mm cranked connectors that I have and they were cheap rubbish so didn't run true and were just to short as well.

 

I've ordered yet another set of covers/cranked connectors: 

    Grohe 12984045 dimensions which I hope are the same as these ones on Amazon

    image.png.fe492b5271f863c2d9946678f2caf36b.png

    https://www.amazon.co.uk/GROHE-12662000-Grohe-12662000-S-Connector/dp/B003NA5M1Q

 

I wish I could find these 35mm cranked connectors in stainless or Chrome:

    image.png.cc01d02d04dcda04e95aae3f1e805d22.png

    https://www.amazon.co.uk/HavenlyCove-S-Connector-Adjustable-140-160mm-Fitting/dp/B0H1BHB9TP

 

1 hour ago, MortarThePoint said:

 

Good thought, but I think it's all pretty solid.

 

I tried some 25mm Amazon decorative covers/Escutcheon with the 46mm cranked connectors that I have and they were cheap rubbish so didn't run true and were just to short as well.

 

I've ordered yet another set of covers/cranked connectors: 

    Grohe 12984045 dimensions which I hope are the same as these ones on Amazon

    image.png.fe492b5271f863c2d9946678f2caf36b.png

    https://www.amazon.co.uk/GROHE-12662000-Grohe-12662000-S-Connector/dp/B003NA5M1Q

 

I wish I could find these 35mm cranked connectors in stainless or Chrome:

    image.png.cc01d02d04dcda04e95aae3f1e805d22.png

    https://www.amazon.co.uk/HavenlyCove-S-Connector-Adjustable-140-160mm-Fitting/dp/B0H1BHB9TP

 

There’s loads available

 

image.thumb.png.813b7bdf798164f0745bad6d0ba59f25.png

4 hours ago, MortarThePoint said:

 

Hi stakes stuff, I'm a bit chicken on this since if something breaks I'm in a world of pain

Clear the grout / adhesive away from each outlet and get a decent sized bar as I suggested. 100mm is a stub, which will give you near zero effective leverage.

 

You need 1mm of movement on each one to get you to 150mm centres, is that correct?

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.