Skirting boards on a step - advice /best practice?

[NeilScotland]

hi all,

 

I have a step - and I'm looking for advice /example son the best way to skirt the side of this step. I'm using 100mm MDF board. 

 

• Below is a photo (excuse the dog, she's everywhere I turn!)
• Also, the way I was intending to do the joins (mitre).
• An example of the board (in situ) I am using
•  

Keen to hear your thoughts,  many thanks, 

Neil 

[Russell griffiths]

i would do it as you have drawn and fit it all dry on a bench and mitre bond it together, then fit in place. 

[markc]

As above, a pain and fiddly to get right but well worth the effort

[NeilScotland]

Ok. Many thanks for the replies. 
have mitre bond on my list.

 

?