September 14, 201610 yr Hi We have just received an approval for 2 storey extension of our house. One of the council's conditions is to provide them the name of block and beam supplier. Why???? But, Any recommendations please. We live in West Midlands, Birmingham. Thank you
September 14, 201610 yr Is the name of the supplier the condition, or that they approve the supplier..??! if it's the latter it's nothing to do with planning...
September 14, 201610 yr Planning conditions usually state why they have been imposed so check your grant. However it would be very unusual for there to be a Planning Condition that only asks for the name of a supplier. I think that would probably be an unenforceable anyway. What is the exact wording of the condition? If you run into any problems getting a supplier approved come back for advice. Might be easy to get the condition lifted if there is one. It's more likely that Building Control want the details and they may also want to see the beam sizes justified. Can all be done by the Beam and Block supplier if you send them a drawing.
September 14, 201610 yr Author That's from notice of conditional approval from Building Consultancy: 4. REGULATION 14 PART A Structural details and calculations for the reinforced concrete have not been deposited (For guidance see paragraph 1.5, Section 1 of Approved Document A1/2). - Beam & Block floor That's from email from my architect: I have received the conditional approval from the council. The outstanding conditions, which I will clear this week, are as follows. Beam and block floor details are required. You will need to send these in when your builder has chosen a supplier for them We provided structural calculations too. Edited September 14, 201610 yr by anna
September 14, 201610 yr That's building regs approval not planning. Get the manufacturer to provide their calculations for the design and that will be fine
September 14, 201610 yr Hi, Can highly recommend a company called Floorspan based in Wisbech. I've been dealing with a guy called Adam who has been very very helpful and unless things go really pear shaped, they'll definitely be getting my business
September 16, 201610 yr Author Thank you Vijay. They replied to me today. Unfortunately on this occasion we must decline to tender. The distance from our casting facility in Cambridgeshire to the site makes it hard for us to be competitive, and also presents us with logistical issues when it comes to managing and executing delivery. Waiting for other quotes to come.
September 16, 201610 yr Author It was Carole who responded to me. Maybe I would try Adam. If you please could send me his email.
September 19, 201610 yr Some 10+ years ago i think our cheapest quote came from Milbank Floors/Milbank concrete products. However they were a long way from us and after transport costs a nearer supplier was a bit cheaper.
September 20, 201610 yr Lite Cast is in Nuneaton, which is 25 miles to Birmingham, so they should be more interested.
September 20, 201610 yr Stressline but they're beans are always dog rough. Have an engineering brick on hand to smooth them down!
December 6, 20169 yr On 14/09/2016 at 13:29, anna said: Hi We have just received an approval for 2 storey extension of our house. One of the council's conditions is to provide them the name of block and beam supplier. Why???? But, Any recommendations please. We live in West Midlands, Birmingham. Thank you Hi, Did you find a good supplier? I'll be looking for one early next year for Shropshire. Thanks Edited December 6, 20169 yr by Wrekin1 edit for grammar
January 24, 20179 yr Author Hi. We used Total Concrete eventually. Lite Cast were a bit cheaper but waiting time was longer and we needed it fast.
Create an account or sign in to comment