January 13, 20197 yr Hi what temperature do most people run there ashp on for the water leaving it? i believe this is the temp for the dhw and the water in the heating system
January 13, 20197 yr Mine is an LG It only ever runs in heating mode OR hot water mode, and each has it's own temperature set independantly, it never runs HW and heating at the same time. For DHW mine has a temperature probe built into the tank and it heats the tank until the desired temperature is reached. I have that temperature set to 47 degrees. To achieve that I have the DHW "water leaving" temperature set to 55 degrees. In heating mode it heats the UFH directly and I have the water leaving temperature set to 37 degrees.
January 13, 20197 yr Author Oh I see that’s good. Mine only has 1 temp and then a thermostat on the ufh manifold to turn the temp down. Mine runs both st same time but I don’t think it should
January 13, 20197 yr This one? http://dreamheatpumps.co.uk/5kw_heat_pump_HOME.html Not much information on their website. No mention of an inverter drive so it is probably very basic and all or nothing? No downloads to manuals or any useful technical specification.
January 13, 20197 yr Author I’ve got a manual. I have a plate with a part number on but I’m unsure what you are getting at? I know it only has one setting to put a temperature in as it was the manufacturer who called me and told me what to do.
January 13, 20197 yr I was trying to find a copy of the manual to have a look at. The exact model number would help to search to see if it is available on line. Without seeing the manual I can't add much to whether there may be different options. It is somewhat of a limitation if there is indeed only one set temperature available.
January 13, 20197 yr Author I see what you are saying. I do think it is a cheap Chinese one been fitted though lol
January 13, 20197 yr Dreams are sold as a kinda "boiler replacement" unit so likely just the one temperature.
January 13, 20197 yr So what’s the issue with the single temperature on your set up? Shouldn’t you be setting it at a temperature appropriate for your DHW and letting the blending valve or whatever you have set up control the UFH at a lower temperature?
January 13, 20197 yr The trouble with a single temperature is it will be a high temperature for DHW, so will be likely too hot for UFH and the heat pump will not run anywhere near as eficcient as it would running at a lower temperature for heating.
January 14, 20197 yr Author 20 hours ago, newhome said: So what’s the issue with the single temperature on your set up? Shouldn’t you be setting it at a temperature appropriate for your DHW and letting the blending valve or whatever you have set up control the UFH at a lower temperature? That’s what I do.
January 14, 20197 yr Author 20 hours ago, ProDave said: The trouble with a single temperature is it will be a high temperature for DHW, so will be likely too hot for UFH and the heat pump will not run anywhere near as eficcient as it would running at a lower temperature for heating. Edited January 14, 20197 yr by Ian Nixon
Create an account or sign in to comment