Log burner install

[James94]

Hi,

 

Rather than having an inset stove we’re going to build the chimney breast out. We currently have a concrete flue that I’m hoping to knock through to and install a flexible flue liner within. Which I can then bring out into the room. 

 

Is it possible to attach the flexible flue liner directly onto the register plate as shown in this image I came across. Can’t see any regs regarding this.

 

Thanks 

[Bonner]

That’s an awful lot of effort, have you considered an exposed twin wall flue? I chose this over a chimney as I prefer the simplicity and preserve the room volume. Also much better airflow around the stove.

[G and J]

8 hours ago, James94 said:

it possible to attach the flexible flue liner directly onto the register plate as shown in this image

Yes you can.  I would thoroughly recommend you get help from a local installer.  We did, we are lucky enough to have a really great guy who went through our design in detail in return for us buying all the bits from him.  I probably could have got the bits cheaper on t’internet but the difference was a small price to pay. 
 

Not sure you want to attach the liner directly to the register plate mind…

[James94]

14 hours ago, Bonner said:

That’s an awful lot of effort, have you considered an exposed twin wall flue? I chose this over a chimney as I prefer the simplicity and preserve the room volume. Also much better airflow around the stove.

Sorry maybe didn’t make myself clear enough, I already have a chimney with a concrete flue liner already installed. So it would just be a case of knocking through to it and then inserting a flue liner, which I could then bring out into the living room

[Bonner]

Couldn’t you join a twin wall flue to your chimney? Might not need a flue liner or chimney breast? Would need the advice of a HETA installer of course