Spigot Tee (22mm)

[MortarThePoint]

Does anyone know where I can get the type of tee shown in the image below? It has two male 22mm connections and one female 22mm compression connection.

 

I would also be happy with a tee that is 22mm male connections all round as I'll be connecting to Hep2O so that would save using a couple on each side.

 

 

[MortarThePoint]

Based on the parts I have (2no. 22F x 3/4M full bore valves and 1no. 22F x 22F isolation valve) the best would be a 22M x 22M x 22M tee. In other words, a tee with all connections as plain 22mm pipe. I know I could make such a thing using a conventional tee and soldering, but it would be nice if there was a premade one since each connection made has a chance of failure.

[Nickfromwales]

On 31/07/2026 at 18:50, MortarThePoint said:

Based on the parts I have (2no. 22F x 3/4M full bore valves and 1no. 22F x 22F isolation valve) the best would be a 22M x 22M x 22M tee. In other words, a tee with all connections as plain 22mm pipe. I know I could make such a thing using a conventional tee and soldering, but it would be nice if there was a premade one since each connection made has a chance of failure.

Firstly, if this is a bypass then you’d want to get rid of the screwdriver operated ballofix valve, and fit another 1/4 turn lever (butterfly handle) tap.

 

It’s likely a softener bypass / kit. 
 

https://wrekinwatertreatment.co.uk/products/22mm-bypass-set-with-integral-tees?pr_prod_strat=e5_desc&pr_rec_id=1e7714181&pr_rec_pid=10023003554121&pr_ref_pid=10023006011721&pr_seq=uniform