Best breather membrane- air and vapour permeable

[ab12]

I'm in the process of doing a full re-roof to replace old bitumen leaky felt. 

 

Would like to go with breather membrane that is air and vapour permeable. Any recommendations please.

 

Pitched roof will be finished of with fibre cement tiles with a dry ridge system and eaves ventilation.

 

It appears most of the membranes on the market are air tight and vapour permeable and a limited supply are both air and vapour permeable.

 

 

 

[JOE187]

https://klober.co.uk/membranes/roof-membranes/p/air-160       Tape all joints.

[G and J]

We used this

 

 Permavent APEX is a 3 layer breather membrane. APEX is both air and vapour permeable

[JohnMo]

We used proctor Roofshield, it vapour and air open. 

[ab12]

5 hours ago, G and J said:

We used this

 

 Permavent APEX is a 3 layer breather membrane. APEX is both air and vapour permeable

Thank you everyone.

Had a look at the prices and SD values

 

Permavent £160 SD value 0.01

Roofshield £150 SD Value 0.013

and Klober £259 SD value 0.009

 

On paper Kolbre wins in terms of breathability but is there a bif difference between 0.009 and 0.1 SD value?

If not then i think either Permavent or Roofshield

 

Also I dont quite understand do thes emembranes to be taped or can they be used untaped.

Look at the brochure if taped for example Permavent require 100mm overlap and if untaped then 150 mm overlap.

 

In terms of tape- any specific type of tape ? or standard waterproof duck tape?

[ab12]

7 hours ago, JOE187 said:

https://klober.co.uk/membranes/roof-membranes/p/air-160       Tape all joints.

Which type of tape please?