Has anyone got experience with Hyline aluminium sliders?

[lookseehear]

I was looking for a quote for Sunflex SF80 sliders and a glazed gable above, but the supplier suggested going with Hyline Hy50 instead because they will do the sliders and glazed gable with an integrated structural top beam to avoid having to install a separate structural element which I'd need to do with the Sunflex.

 

I searched but came up blank - anyone been quoted on them or had experience with them?

[Mr Punter]

I have no experience of them but if they are a decent fabricator and you have seen their installations then why not?

[Bonner]

No personal experience of them but found their website https://hbdsystems.co.uk/hyline-sliding-doors/

Would be surprised if they manufacture themselves, maybe rebranding something from Eastern Europe?

 

[Bonner]

@craig, may know them

[craig]

I know of them but haven’t actually come across them yet. Sorry, not really anything I can add. 
 

As far as I know, this is their own system (Hyline) and not a profile they buy such as Cortizo. There are a few suppliers in the UK but not many are “main stream”.

Edited February 6 by craig

[lookseehear]

For some reason I wasn't notified of these replies so only just coming back to this topic.

 

On 06/02/2026 at 08:44, craig said:

I know of them but haven’t actually come across them yet. Sorry, not really anything I can add. 
 

As far as I know, this is their own system (Hyline) and not a profile they buy such as Cortizo. There are a few suppliers in the UK but not many are “main stream”

 

Do you know of other manufacturers that will include a structural beam between the sliders and the glazed gable? We're looking for something like this (sent from the supplier) but ideally all supplied and installed by the same supplier rather than getting the structural beam specced and installed separately:

 

[craig]

Is it just aluminium? Sleek look with minimal sightlines. You’re looking something like Solarlux Cero, Cortizo, Q-Fort, Reynaers, Schuco etc.

 

These can be a bit pricey.