missing part needed for a kitchen sink trap kit (waste pipe)

[lord mud of the flyes]

Hi

Have a standard cheepo kitchen sink sold hear

1.5 Bowl Stainless Steel Kitchen Sink & Drainer 1000mm x 500mm - Screwfix

 f-male thread on the bottom of sink about 2" OD

 

What I have for a pipe is what you can see in the photo

So what ells do I need?

 

Thanks

[ProDave]

You are missing the nut and it's sealing washer from the right hand pipe outlet of the trap.  so the waste pipe will go in there but without the washer and nut it won't seal.

 

Depending on your sinks you may also need a telescopic section on the 2 sink connections to account for different bowl heights.

 

Might just be simpler to start with a new 1 1/2 bowl trap kit.

[lord mud of the flyes]

6 hours ago, ProDave said:

You are missing the nut and it's sealing washer from the right hand pipe outlet of the trap.  so the waste pipe will go in there but without the washer and nut it won't seal.

 

Depending on your sinks you may also need a telescopic section on the 2 sink connections to account for different bowl heights.

 

Might just be simpler to start with a new 1 1/2 bowl trap kit.

I had disconnected that so i could take a photo of it for everyone to see it🥵

[Nickfromwales]

7 hours ago, lord mud of the flyes said:

I had disconnected that so i could take a photo of it for everyone to see it🥵

 Put it back together and take another photo lol.