Jump to content

Extension Cavity Insulation


Recommended Posts

On 15/01/2025 at 16:30, lookseehear said:

I came up with a solution for this today. I bought a couple of packs of these driveway grids https://www.wickes.co.uk/Wickes-Ground-Grid-Base---100-x-100cm/p/236266? which are 250x250 and come in a pack of 4. They cut really easily with a track saw, so I've cut them into roughly 120mm wide strips. Should do the job nicely.

 

'Fluffy stuff' as my builder calls it is going in. Seems pretty easy to work with.

 

image.thumb.png.3fe35e0ffb969c5dfe3f044e48551638.png

 

And here's the jig for cutting the cavity tray profile. Straight cuts are super straightforward, but on an angle it's a lot trickier to hold the line.

 

image.thumb.png.02207083751e0cba244665acbd647165.png

  • Like 1
Link to comment
Share on other sites

I remember when I insulated my slab . I put pir down , filled all the bits so nice and tight . Polythene over the lot , taped and up the walls all ready for screed .

I thought I’d get the screed guy to look first - make sure it was ok . He started swearing . I asked what I had done wrong !?

He said nothing . But no one fills in all the pir gaps . We just pour the screed and watch it push the pir apart as it flows into the void . Then the owner complains of cold spots in the ufh .

This tells me a specific person on a specific trade can be sloppy / don’t care / naive - clearly not everyone though .

Link to comment
Share on other sites

59 minutes ago, Pocster said:

I remember when I insulated my slab . I put pir down , filled all the bits so nice and tight . Polythene over the lot , taped and up the walls all ready for screed .

I thought I’d get the screed guy to look first - make sure it was ok . He started swearing . I asked what I had done wrong !?

He said nothing . But no one fills in all the pir gaps . We just pour the screed and watch it push the pir apart as it flows into the void . Then the owner complains of cold spots in the ufh .

This tells me a specific person on a specific trade can be sloppy / don’t care / naive - clearly not everyone though .

 

Same when i did my garage base. Spent forever getting the thing bob on. Then insulation over, again, no voids taped etc.

 

Concrete guys arrived and asked who did it. Reckon it was the best prep they had ever seen. Certainly doesnt say much for what they usually see.

 

 

DSCF1115.JPG

DSCF1123 (1).JPG

DSCF1124 (1).JPG

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...