crispy_wafer Posted May 29 Share Posted May 29 Simple question I hope, What's the preferred onsite methods for cable drops when using mf ceiling? Cut the mf6 short and leave a gap?, Cut the top/bottom and just fold out the way? I can't really chase behind as the timber wall plate is just above the mf6. Then protect the cable in conduit as it passes over/between the metal, protect from the sharp edges? Link to comment Share on other sites More sharing options...
nod Posted May 29 Share Posted May 29 Clip the top edge and bottom edged and fold in No sharp edged 1 Link to comment Share on other sites More sharing options...
crispy_wafer Posted June 3 Author Share Posted June 3 @nod pretty please! Looking at a single layer of 15mm acoustic boards followed by skim, is 1200*1200 hangers/mf7 ok, or should i decrease the spacing. I’ll be fixing the boards @ 400’s as per. Link to comment Share on other sites More sharing options...
nod Posted June 3 Share Posted June 3 Top hat always at 400 centres Double board or Sounblock over 12.5 Decrease hangers to 800s 1 Link to comment Share on other sites More sharing options...
nod Posted June 3 Share Posted June 3 26 minutes ago, nod said: Top hat always at 400 centres Double board or Sounblock over 12.5 Decrease hangers to 800s 👍 Link to comment Share on other sites More sharing options...
crispy_wafer Posted June 14 Author Share Posted June 14 Almost done... What's the preferred method of securing the top hat? Spring clips or screws? I've got both to hand Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now