So about to buy a Vent Axia Kinetic Highflow.

[CalvinHobbes]

So going for option 1  a Vent Axia High Flow (4 x 180mm spigots)going into a 262m² 2 story house. 

Optional extras include a vent axia digital controller - hard wired and a 1 gang momentary boost switch x 7 (presumably there should be a boost switch in every shower room/loo/the kitchen)?

Has it got a good enough reputation?

 

 

Edited June 20, 2023 by CalvinHobbes

[Eric]

I installed a Vent Axia in my last house & was very pleased with it.

The controller was pretty old school. 
I didn’t use the boost switches as it had a built in humidity sensor which worked well.

 

Edit,

You can also boost from the controller.

Edited June 20, 2023 by Eric
Info

[dpmiller]

got one, good job.

[IanP]

Trying decide on 2 quotes one from Paul heat recovery with a Zehnder ComfoAir Q350, other from Mark heat recovery with the Vent Axia sentinel kinetic highflow. 

The quote with the Vent Axia is much cheaper, but wondering if it's a lower spec unit. 

Anyone with experiance of the 2 suppliers? 

Planning on installing myself and getting them to do the commissioning.