Jump to content

Outdoor door post


Recommended Posts

It is a good idea to have the stop at mid height of the door. By doing this the door is not distorted, as it is when the bottom of the door crashes against the buffer. The centre of a blank door usually has a structural section at mid-height, but aim for another horizontal bar to suit your door.

The height also prevents the post from  being a trip hazard.

 

In simple terms it can be any sort of post with a doorstop fixed to it horizontally.

If this was a rear service door then it can be as functional as you like: a 2x2 timber will also flex when hit so is good for the door. A scaffold tune is firmer. Then work up from there to something prettier as appropriate to the location.

  • Thanks 1
Link to comment
Share on other sites

10 hours ago, saveasteading said:

It is a good idea to have the stop at mid height of the door. By doing this the door is not distorted, as it is when the bottom of the door crashes against the buffer. The centre of a blank door usually has a structural section at mid-height, but aim for another horizontal bar to suit your door.

The height also prevents the post from  being a trip hazard.

 

In simple terms it can be any sort of post with a doorstop fixed to it horizontally.

If this was a rear service door then it can be as functional as you like: a 2x2 timber will also flex when hit so is good for the door. A scaffold tune is firmer. Then work up from there to something prettier as appropriate to the location.

Thank you for your helpful, detailed reply. Given us plenty to think about. We are now looking at bollards rather doorstops! 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...