WWilts Posted May 30, 2021 Share Posted May 30, 2021 Garage demolition, side porch to replace it. Small, Building Regs exempt. Design fixed by planner. Existing external walls of main dwelling will form 2 (internal) sides of the porch. Currently garage has a double skin wall (outer stone, inner brick). Concrete floor. About 550mm below main dwelling floor level. Can the existing foundations for the front elevation be retained and used? What would determine whether or not? Any particular approach recommended to join the side wall securely to the existing external side wall? If retaining the existing concrete slab, what layers would you use to build it up by about 275mm? Then it will be level with an existing step that leads from main dwelling down to existing garage floor. Link to comment Share on other sites More sharing options...
nod Posted May 30, 2021 Share Posted May 30, 2021 Normally you would get a Structural Engineer to determine the method of joining the two and foundations also Followed up with a drawing Who has told you you don’t need building regs Structural alterations normally require BC 1 Link to comment Share on other sites More sharing options...
WWilts Posted May 30, 2021 Author Share Posted May 30, 2021 14 minutes ago, nod said: Who has told you you don’t need building regs LA building control. Exempt, and they will not issue completion certificate Link to comment Share on other sites More sharing options...
nod Posted May 30, 2021 Share Posted May 30, 2021 New one on me Link to comment Share on other sites More sharing options...
Temp Posted May 30, 2021 Share Posted May 30, 2021 I think porches are exempt but only if you retain the external grade door between house and porch. If you are replacing the door with an internal style door and heating the "porch" then I think you do need building control. If you want to build in brick I think you need to dig a hole next to the slab to see if its got proper foundations. If not then perhaps look at a timber frame? 6 hours ago, WWilts said: If retaining the existing concrete slab, what layers would you use to build it up by about 275mm? I'm thinking you need a few courses of bricks then a DPC and DPM on sand blind. Then insulation and screed. 200mm PIR and 75mm screedwould be good. 1 Link to comment Share on other sites More sharing options...
Temp Posted May 30, 2021 Share Posted May 30, 2021 PS Perimeter insulation before the screed. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now