Jump to content
  • entries
    2
  • comments
    15
  • views
    1884

About this blog

After spending 50 years always being right, I have finally come to realise that in each project I in fact failed my way to success. This is also true in my Rainwater Harvesting DIY project. The last fails with this were due to my inexperience in soldering wires.

 

I hope to set out some basic considerations when considering Rainwater use and share my system details.

 

 

Entries in this blog

The 4 phases from Rainwater to flushing the loo

We use 4 phases from rainwater to flushing the loo with it and they are:   Collecting, separating and storing in bulk tank. Fine filtering and storing in barrel. filling the gravity tank in the loft Filling the cistern   This is not the only system that is possible but one that works with our property limitations. This design and its controls take into account freezing conditions. We use two 12V pumps run from batteries and PV.  
×
×
  • Create New...