Jump to content

Recommended Posts

Posted

I'm about to lay lots of 110mm drainage pipe and wondered if there is some effective protection I can put in to prevent root penetrating the ring seals. Ideally it would be something I can wrap around the joint. Has anyone identified a good approach.

 

Osma have something new called Rootseal. No idea if it works and it is only on newly bought Osma fittings and I have a lot of older black ring fittings.

 

Posted (edited)

I can find geotextile sleeves designed to stop silt and sand entering land drain pipes, but not one designed to sleeve over pipe couplings to stop root penetration.

 

Three approaches I am considering are:

  1. Do nothing
  2. Wrap and cable tie each coupling with a 1m length of non-woven geotextile like this: https://www.amazon.co.uk/dp/B0DQ88WHD4/?th=1
  3. Use a 1m length 8" temporary downpipe or layflat tubing an duct tape at each coupling (normal 150mm not large enough)

I found this but not UK: https://www.mainlinematerials.com/products/underground-pipe-root-barrier

Edited by MortarThePoint
Posted
On 27/11/2025 at 07:38, MortarThePoint said:

I can find geotextile sleeves designed to stop silt and sand entering land drain pipes, but not one designed to sleeve over pipe couplings to stop root penetration.

 

Three approaches I am considering are:

  1. Do nothing
  2. Wrap and cable tie each coupling with a 1m length of non-woven geotextile like this: https://www.amazon.co.uk/dp/B0DQ88WHD4/?th=1
  3. Use a 1m length 8" temporary downpipe or layflat tubing an duct tape at each coupling (normal 150mm not large enough)

I found this but not UK: https://www.mainlinematerials.com/products/underground-pipe-root-barrier

Option 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...