Dexlan Posted yesterday at 05:03 Posted yesterday at 05:03 Hi all recently purchased a property with a log burner with insulated flue. Water is somehow getting into the insulation, which is causing a drip in the house at the lowest point behind the log burner. I have been up on a ladder to inspect the flue but can’t see any damage to the flue that would allow water ingress. I have been testing joints with a hose pipe on low flow to see which it could be and I suspect it could be at a 45 degree elbow as the drip appeared inside again after testing that joint but again can’t see anything wrong with it install wise or condition. I also had the cowl changed on the top as it was delaminating and seemed in poor condition but it hasn’t changed the dripping. Any ideas please ? As the only other thing I can think of now is to install a new flue. Costly! See image thanks in advance
Bonner Posted yesterday at 06:43 Posted yesterday at 06:43 What is the white stuff around this joint? Shouldn’t need any sealant on these flue systems. You might need to remake some joints or replace an elbow, certainly don’t need a whole new flue!
JohnMo Posted yesterday at 07:06 Posted yesterday at 07:06 I would get your local stove company in to do a full inspection of fire and flue. Spraying water when you know the insulation is already wet isn't a good idea.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now