Tom Adcock Posted January 3 Share Posted January 3 Hi guys, just wondering what everyone has done when using the GSE side flashings with slates? The side flashing has an up turn on it which will kick the slates up really high. Is it as simple as just cutting the up turn off or hammer it flat? And then only fixed down on the battens but not through the flashing? Does this make sense? Link to comment Share on other sites More sharing options...
Conor Posted January 3 Share Posted January 3 Are you sure you ordered the slate flashings? Just looked back at photos of mine, slates don't sit noticeably high . I didn't modify anything. 1 Link to comment Share on other sites More sharing options...
Nick Laslett Posted January 3 Share Posted January 3 I agree with @Conor. I did not notice any specific issues with the slate/flashing interface. There was a foam tape you run along the flashing, that the tile rests on. Link to comment Share on other sites More sharing options...
Conor Posted January 3 Share Posted January 3 From memory the rain ridge was about 3-5mm high? I.e. the thickness of a slate. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now