Alexphd1 Posted March 26 Share Posted March 26 Quick question. We would like to overlay the breakfast bar with glass. We explained the requirements to two suppliers. One has quotes 6mm and the other 10mm. 10mm is x2.5 the price. Any recommendations experience on this? Link to comment Share on other sites More sharing options...
Alan Ambrose Posted March 26 Share Posted March 26 If the bar is perfectly flat with no sticky-up bits that will cause 'stress risers' to induce cracking then 6mm should be fine. Toughened gets a huge strength premium over standard. I assume it's not so crazy big that it can't be manoeuvred into the horizontal by hand without overly stressing/flexing it? I would double check the flatness with a long straight edge. Link to comment Share on other sites More sharing options...
Alexphd1 Posted March 26 Author Share Posted March 26 It's 2.2x 0.54m , surf board shape. It's supported approx 3 inch all around the outside. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now