IronBeefa Posted October 20, 2023 Share Posted October 20, 2023 Purchased this burner from eBay ( I know not the best) but will hopefully serve the purpose for the mancave, it has come with a non insulated flue and I need to put the flue through an insulated roof and wood therefore I need to get an insulated flue that will fit. dos anyone know what would be the best flue to get and what I can use to convert the size of this one into the insulated one? and if anyone could send me a link that would be much appreciated Thank you!! Link to comment Share on other sites More sharing options...
Alan Ambrose Posted October 20, 2023 Share Posted October 20, 2023 Take a look at Schiedel ICID system. The ‘distance from combustibles’, plinth, fireproof detailing through the roof and chimney height are important. Probably a BC / skilled installer thing and/or demonstrate you have ‘obeyed all the rules’. 1 Link to comment Share on other sites More sharing options...
Crofter Posted October 20, 2023 Share Posted October 20, 2023 Those sizes look a bit odd. It's generally 4", 5", or 6". Should be a snug fit between sections. Single wall is cheap and throws out a fair bit of heat. But you can't have it within a certain distance of combustibles. Twin wall can be pretty close to combustibles (~2" from memory). Non combustible includes masonry and cement fibre board. It's not rocket science but the rules are there for a reason and the consequences of getting it wrong are pretty bad. 1 Link to comment Share on other sites More sharing options...
IronBeefa Posted October 23, 2023 Author Share Posted October 23, 2023 This is the specification for said heater Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now