tuftythesquirrel Posted March 25, 2023 Share Posted March 25, 2023 (edited) Could anyone help me with our MVHR installation. It's a Komfort EC SB Heat Recovery Unit - 550, using their BlauFast Radial Duct Manifold Box and 75mm semi-rigid ducting. We have a large vaulted area in the middle of the building, which is our kitchen/diner. This is 10m x 6m, with a 5.5m pitch roof/ceiling. The services that run through this area are all run on suspended galvanised traywork (see pic.). I want to run the MVHR in this area in 80mm round spiral galvanised duct (possibly Lindab), since the bright green 75mm plastic duct will look a bit out of place. At some point I will need an adapter to convert the duct from 75mm plastic to 80mm metal. Also, I need an adjustable metal supply/extract valve on the end on the 80mm duct. Again because the plastic plenum box they supply to fit in ceilings in not suitable or pleasing to the eye. I'm having trouble getting either of these items off the shelf. Could any suggest a supplier. Thanks. Edited March 25, 2023 by tuftythesquirrel Typo Link to comment Share on other sites More sharing options...
Dave Jones Posted March 25, 2023 Share Posted March 25, 2023 as your going for the industrial look anyway id just use a large metal factory type plenum and make feature of it. Link to comment Share on other sites More sharing options...
Conor Posted March 25, 2023 Share Posted March 25, 2023 You can do it in 125mm and end with a 90bend and fit a Lindab airy valve directly to it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now