Andehh Posted October 31, 2022 Share Posted October 31, 2022 Hi all, I am looking at Waste Water heat recovery systems for our showers. One has a standard 25mm shower tray, which will have the subfloor built up by approx 200mm to accommodate it. The second will be a wet room area, ideally with a preformed tray, which again will be built up by approx 200mm to accommodate it. Can anyone recommend any low profile waste water heat recovery systems which could be compatible with this space? Due to the nature of it being a bungalow built on block & beam flooring, we are limited with space! Many thanks, Link to comment Share on other sites More sharing options...
Andehh Posted November 1, 2022 Author Share Posted November 1, 2022 Doesn't bode well, I had hoped they were more common? Link to comment Share on other sites More sharing options...
dpmiller Posted November 1, 2022 Share Posted November 1, 2022 what height is the waste pipe at within this 200mm void? We fitted a Zypho IZI and the unit is only about 90mm tall, plus it's adjustable feet. 1 Link to comment Share on other sites More sharing options...
KillyfadNewBuild Posted November 1, 2022 Share Posted November 1, 2022 I had WWHR installed to ensure I achieved an A SAP rating within our build. Our build isn't finished just yet so not at the point to give my own review/feedback. From a local supplier who was very helpful and informative. https://showersave.com/ 1 Link to comment Share on other sites More sharing options...
Andehh Posted November 2, 2022 Author Share Posted November 2, 2022 On 01/11/2022 at 07:37, dpmiller said: what height is the waste pipe at within this 200mm void? We fitted a Zypho IZI and the unit is only about 90mm tall, plus it's adjustable feet. Thank you very much, this is exactly the sort of thing I was hoping for....!! Have you got any pics of the installation? Is the drain on it replacable with one we have chosen? Thank you! Link to comment Share on other sites More sharing options...
Andehh Posted November 2, 2022 Author Share Posted November 2, 2022 On 01/11/2022 at 10:38, KillyfadNewBuild said: I had WWHR installed to ensure I achieved an A SAP rating within our build. Our build isn't finished just yet so not at the point to give my own review/feedback. From a local supplier who was very helpful and informative. https://showersave.com/ Thanks, due to bungalow it needs to be a flat/low profile one! Link to comment Share on other sites More sharing options...
dpmiller Posted November 2, 2022 Share Posted November 2, 2022 The inline IZI is just 40mm in and out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now