metal (18th ed) cable clips -not hammer in!

[Crowbar hero]

I'm looking for a series of relatively affordable metal cable clips that are screw-in, kinda like the old buckle style clips you don't really see any more.  I want something screw in so I can reposition or swap out as I go, without destroying the clip in the process.  I'll be using them on T&E mostly,  fixed to block and joists, maybe in trunking too.

Any suggestions or recommendations? 

Edited September 19, 2022 by Crowbar hero

[TonyT]

Why not just use normal t&e clips and when you are finished wiring go back and add metal t&e hammer in clips every metre?

 

[Crowbar hero]

  On 19/09/2022 at 18:55, TonyT said:

Why not just use normal t&e clips and when you are finished wiring go back and add metal t&e hammer in clips every metre?

 

Expand  

'cos I really don't like hammer in clips 😐

[TonyT]

https://www.toolstation.com/safe-d-40-fire-rated-cable-clips/p92908?store=D6&utm_source=googleshopping&utm_medium=feed&utm_campaign=googleshoppingfeed&mkwid=_dm&pcrid=&pkw=&pmt=&gclid=EAIaIQobChMIs9C8tceh-gIVDpftCh10lgrSEAQYByABEgKVG_D_BwE&gclsrc=aw.ds
 

 

may look odd without the trunking?

[Crowbar hero]

  On 19/09/2022 at 19:11, TonyT said:

https://www.toolstation.com/safe-d-40-fire-rated-cable-clips/p92908?store=D6&utm_source=googleshopping&utm_medium=feed&utm_campaign=googleshoppingfeed&mkwid=_dm&pcrid=&pkw=&pmt=&gclid=EAIaIQobChMIs9C8tceh-gIVDpftCh10lgrSEAQYByABEgKVG_D_BwE&gclsrc=aw.ds
 

 

may look odd without the trunking?

Expand  

 

I'm not sure what constitutes a good looking cable clip anyway..?  I think the plastic ones are horrid. especially those that seem to have been installed by the apprentice with his shoe.  Most of this would be hidden away out of sight anyway.

 

[TonyT]

You can buy copper strip we used to make our own clips when we had multiple pyro runs in parallel of course this was 30 years ago.

 

You could probably use https://www.cef.co.uk/catalogue/products/17254-bare-copper-single-fixing-clip-37-pack-of-50

 

and go Size up, cut a piece of timber the dimension of t&e and dress the clip?

 

all sounds like a lot of work though..